Hello all!
Quick question.
I was just wanting to see if it is possible to make a Minitor III, IV or V pager a Private Line Pager.
I know from years past the Minitor I and II pagers were capable of doing this.
Please advise
Thanks
David
KI4GBJ
Minitor question?
Moderator: Queue Moderator
-
- Posts: 424
- Joined: Thu Feb 13, 2003 10:04 am
-
- New User
- Posts: 52
- Joined: Wed Oct 24, 2007 1:26 am
Re: Minitor question?
I don't remember seeing anything in the V software to give PL as an option.
I set our A and B so they only open when recognized tones are heard, they're quiet the rest of the time.
C is set as Priority scan so it's constantly looking back A, but works as a 2 channel scanner.
D is set as Probable scan so its just a 2 channel scanner.
They will still alert when the correct tones are heard no matter if set on A-B-C-D.
I set our A and B so they only open when recognized tones are heard, they're quiet the rest of the time.
C is set as Priority scan so it's constantly looking back A, but works as a 2 channel scanner.
D is set as Probable scan so its just a 2 channel scanner.
They will still alert when the correct tones are heard no matter if set on A-B-C-D.
Re: Minitor question?
There is no provision for "private line" in any Minitor pager since Minitor II.
- kf4sqb
- Posts: 1491
- Joined: Mon May 19, 2003 9:11 pm
- What radios do you own?: I can't enter that much....
Re: Minitor question?
The only Minitor series pager capable of PL was the Minitor I, and you lost selcall if you converted it to PL, making it just a plain receiver with no alert.
kf4sqb "at" wetsnet "dot" com
Look for the new "Jedi" series portables!
Bat-Phone= BAT-CAVE (2283)
-.- .. ....- -.-. -.-- . .. ... -- -.-- -... .-. --- - .... . .-. .-.-.-
Look for the new "Jedi" series portables!
Bat-Phone= BAT-CAVE (2283)
-.- .. ....- -.-. -.-- . .. ... -- -.-- -... .-. --- - .... . .-. .-.-.-