Minitor V and Station Alerting w/Multiple Sounds

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

Post Reply
User avatar
bnn121
Posts: 197
Joined: Sat Apr 27, 2002 5:09 am

Minitor V and Station Alerting w/Multiple Sounds

Post by bnn121 »

Need some suggestions with putting together the following:

1) Minitor V two channel, dual alert - (Two different sets of alert tones, one on each channel)
2) Minitor V amplified charger with built in electronics for external triggering of devices
3) Three devices that produce some sort of loud annoying sound/s (Klaxon device)

Need to use a Minitor V two channel none stored voice pager to set off three audible devices simutaniously that are capable of producing different sounds depending on which channel was alerted.

Each audible device will be located in different areas of the building. The Minitor V will be located somewhere central to each audible device.

Depending on what type of Audible device is used, any suggestions on the type of wiring that should be run? Will standard speaker/zip cord be adequate for the wiring?

Looking for sources on a audible device that is capable of producing different sounds.

If this is not possible with just one Minitor V pager, any suggestions on how to place something like this into service with just the one pager, amplified charger and three Klaxon type devices?

Thanks for your help with this.
User avatar
kb9suy
Posts: 311
Joined: Fri Dec 21, 2001 4:00 pm
What radios do you own?: too many!!

Re: Minitor V and Station Alerting w/Multiple Sounds

Post by kb9suy »

Post Reply

Return to “Motorola Digital and Voice Paging”