Installing A Wig Wag Flasher in an '00 Jeep Grand Cherokee

Discussions regarding lighting, sirens, and other PS/Emergency response equipment can be had within this forum.

Discussions regarding legalities of lights, usages, and different state laws and regulations regarding warning equipment are not permitted.
See the announcement inside the forum for more details.

Moderator: Queue Moderator

Post Reply
Ben10001
New User
Posts: 18
Joined: Mon Oct 15, 2007 7:21 pm
What radios do you own?: EX600, EX500, HT750 and more

Installing A Wig Wag Flasher in an '00 Jeep Grand Cherokee

Post by Ben10001 »

Where would I cut the high beam and splice in the flasher (a Federal Signal FA5). I know that I need to cut between the two high beam bulbs, but which side is it? Driver or passenger?

Any help would be greatly appreciated.
Ben,
User avatar
FireCpt809
Posts: 1846
Joined: Sat Jan 19, 2002 4:00 pm
What radios do you own?: Alot..

Re: Installing A Wig Wag Flasher in an '00 Jeep Grand Cherok

Post by FireCpt809 »

Doesnt matter.
Ben10001
New User
Posts: 18
Joined: Mon Oct 15, 2007 7:21 pm
What radios do you own?: EX600, EX500, HT750 and more

Re: Installing A Wig Wag Flasher in an '00 Jeep Grand Cherok

Post by Ben10001 »

Do I need to cut the harnesses going to both headlamps or just one on one side?
Ben,
Post Reply

Return to “Vehicle Warning Equipment Discussion”