Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

2014 Utility Interceptor Brake, Tail light, kill switch

Discussions regarding lighting, sirens, and other PS/Emergency response equipment can be had within this forum.

Discussions regarding legalities of lights, usages, and different state laws and regulations regarding warning equipment are not permitted.
See the announcement inside the forum for more details.

Moderator: Queue Moderator

jdw911
New User
Posts: 2
Joined: Wed Mar 19, 2014 5:39 am

2014 Utility Interceptor Brake, Tail light, kill switch

Postby jdw911 » Wed Mar 19, 2014 5:49 am

I am checking to see if anyone has done a kill switch to kill brake lights, tail lights and reverse lights in a new 2013 or 2014 ford police interceptor utility. In the upfitter guide it says go to section two but can't seem to find out to do it as they don't want you to splice into the wiring.

Any thoughts or recommendations.

Thanks

User avatar
spectragod
Posts: 1962
Joined: Sun Dec 30, 2001 4:00 pm
What radios do you own?: FPP 6 meter XTL 5K's

Re: 2014 Utility Interceptor Brake, Tail light, kill switch

Postby spectragod » Sun Mar 23, 2014 6:46 pm

jdw911 wrote:I am checking to see if anyone has done a kill switch to kill brake lights, tail lights and reverse lights in a new 2013 or 2014 ford police interceptor utility. In the upfitter guide it says go to section two but can't seem to find out to do it as they don't want you to splice into the wiring.

Any thoughts or recommendations.

Thanks


IIRC, the brake wire is blue with a gray tracer going into the BCM on the drivers side, you can split it there "before" the BCM, I understand that is "safe", I would have to check my notes at work to verify the color combo though.
Kilgore: Smell that? You smell that?
Lance: What?
Kilgore: Napalm, son. Nothing in the world smells like that.
Kilgore: I love the smell of napalm in the morning. You know, one time we had a hill bombed, for 12 hours. When it was all over, I walked up. We didn't find one of 'em, not one stinkin' dink body. The smell, you know that gasoline smell, the whole hill. Smelled like... victory. Someday this war's gonna end...

____________
Revelation 6:8


Return to “Vehicle Warning Equipment Discussion”

Who is online

Users browsing this forum: No registered users and 1 guest