ss2000sm
Moderator: Queue Moderator
-
- New User
- Posts: 2
- Joined: Sat May 16, 2009 9:46 am
ss2000sm
Is it normal to have all the relays activate when you turn on the SS2000SM. By relays activating, thus gives power to all outputs (i.e. 1, 2, 3, etc...). Is this normal, or is something wrong with how I wired or the ss2000sm unit?
Re: ss2000sm
By default, the relays do not energize (activate) when powered up. Check the configuration manual and "reset" it by default on level 1. It's possible that the unit was programmed to have all relays power up when power is applied thru the 12-pin red lead.
Sean
Sean
Sean Barr
EVConcepts
EVConcepts