Saber III

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
Oquintan
New User
Posts: 5
Joined: Sat Apr 19, 2014 12:35 pm

Saber III

Post by Oquintan »

So, my buddy asked me to program his saber III however when I plug in the cable and read the radio is says that there is a problem with the connection and the operation is cancelled. The whole operation works fine on Saber II radios, is there a different cable for Saber III?

Oscar
Oquintan
New User
Posts: 5
Joined: Sat Apr 19, 2014 12:35 pm

Re: Saber III

Post by Oquintan »

I might add that the radio emits a sold tone when powered up. The tome goes away when the cable is attached to the radio. Perhaps the radio is toast?
Oquintan
New User
Posts: 5
Joined: Sat Apr 19, 2014 12:35 pm

Re: Saber III

Post by Oquintan »

I think I got my answer, I used the proper version of software and found out that it is a 430Mhz split systems saber.
Looks like its a parts radio.

Thanks.
Post Reply

Return to “Radio Programming”