Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

CDM in Zone 2 But Defaults to #1 Freq. in Zone 1 Scan List

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

ten13
Posts: 27
Joined: Mon Nov 24, 2003 6:32 am

CDM in Zone 2 But Defaults to #1 Freq. in Zone 1 Scan List

Postby ten13 » Wed Nov 16, 2016 12:14 pm

I set up my 1250 with a 2nd Zone, along with setting up a Scan List 2 for Zone 2.

When in Scan mode in Zone 2, it prioritizes the frequency in the #1 position in Scan List 1, Zone 1.

All Zone 2 channels have Scan List 2 selected, and the #1 position in Zone 1 has Scan List 1 selected.

The frequency in that Zone 1 is not on Zone 2.

What S/W box didn't I check, or do I have one that shouldn't be checked?

Thanks!

ten13
Posts: 27
Joined: Mon Nov 24, 2003 6:32 am

Re: CDM in Zone 2 But Defaults to #1 Freq. in Zone 1 Scan List

Postby ten13 » Wed Nov 16, 2016 5:52 pm

DISREGARD....

Stupid programming mistake with a couple of channels.

Condition corrected....


Return to “Radio Programming”

Who is online

Users browsing this forum: No registered users and 5 guests