Need to make rear USB programming cable.
Moderator: Queue Moderator
-
- Posts: 1648
- Joined: Wed Apr 02, 2003 10:35 am
- What radios do you own?: APX XTS XTL TRBO 900MHZ
Need to make rear USB programming cable.
I have 4 XTL radios, & whenever I need to program them, I need to plug, & unplug 4 microphones. I'm tired of that. On my XPR radios, Moto supplies a plug, & pins to make any kind of rear cable you want. I leave the rear cables plugged in my XPR's 24/7, so I never need to remove the microphones. I want to have the same deal on my XTL's. I have plenty of USB printer cables to attach to my acc cables. Has anyone made/converted a cable, & where does one find the pins for the XTL acc plug? I need to convert 4 acc cables. GARY
-
- Posts: 1648
- Joined: Wed Apr 02, 2003 10:35 am
- What radios do you own?: APX XTS XTL TRBO 900MHZ
Re: Need to make rear USB programming cable.
By the way, the factory part # for the cable is HKN6163. GARY
Re: Need to make rear USB programming cable.
I've made a few, it's dead easy. Google is your friend for accessory pin outs:
http://s27.postimg.org/harrwkwc3/J2_Connector.jpg
http://s27.postimg.org/harrwkwc3/J2_Connector.jpg
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.
Welcome to the /\/\achine.
Welcome to the /\/\achine.
-
- Posts: 1648
- Joined: Wed Apr 02, 2003 10:35 am
- What radios do you own?: APX XTS XTL TRBO 900MHZ
Re: Need to make rear USB programming cable.
That I have, thanks. What I'm looking for are the actual pins for the XTL ACC plug. The factory plug that comes with the radio comes with 5 pins. I need to find 4 more pins per radio for the USB cable. GARY.
Re: Need to make rear USB programming cable.
Motorola part# 3980034F04
DigiKey P/N 1003-1951-1-ND
DigiKey P/N 1003-1951-1-ND