I here asking. I have a mts2000 uhv model one with the frequency being 450-520 I think it is an S in the model number I tweet the cps software to were I could put in a 444. Frequency in. Is there any type of tuning that needs to be done? To be able to rx and rx on them frequencies. Thanks
Justin
Mts2000 out of band programming
Moderator: Queue Moderator
-
- New User
- Posts: 2
- Joined: Sat Apr 15, 2017 12:21 pm
-
- New User
- Posts: 2
- Joined: Sat Apr 15, 2017 12:21 pm
Re: Mts2000 out of band programming
I am sorry, Should have looked at what I wrote.jusromaine wrote:I here asking. I have a mts2000 uhv model one with the frequency being 450-520 I think it is an S in the model number I tweet the cps software to were I could put in a 444. Frequency in. Is there any type of tuning that needs to be done? To be able to rx and rx on them frequencies. Thanks
Justin
I would like to know, I have a MTS2000 FLASHport Model I. With the Frequency being 450-512. It Is an S Model. I have edited the CPS Software to Were I can UHF Split "403-470". Now would I have to tune my radio any due to the frequency Split? Or is that too much of a split for my Radio to handle.
Thanks
-
- Batboard $upporter
- Posts: 2884
- Joined: Mon Sep 03, 2001 4:00 pm
Re: Mts2000 out of band programming
Jedi's usually do about 10 MHz out of band with good results without tuning. Won't go much past 10 even with tuning, the hardware is self limiting.