Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

CDM750 TX Alignment?

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

leaper54
New User
Posts: 14
Joined: Thu Jul 31, 2014 5:35 am

CDM750 TX Alignment?

Postby leaper54 » Sat May 06, 2017 4:58 am

I'm using the PRO CPS software R6.12.05. There is supposed to be a separate ' TX Align ' section I cannot find. Is this separate software? I need to raise the deviation. It seems to be hard limited to 3KC, even though I have the personalitiy set for 25KC spacing.

User avatar
kcbooboo
Batboard $upporter
Posts: 2086
Joined: Wed May 01, 2002 9:03 am

Re: CDM750 TX Alignment?

Postby kcbooboo » Sat May 06, 2017 12:28 pm

Yes, there's a separate program called TUNER that does all the alignments.

If the programming software is newer than a few years, remember that it only allows narrow-band (2.5 kHz) programming unless you've got the special entitlement key to allow 5 kHz deviation.

Bob M.

User avatar
jackhackett
Posts: 1402
Joined: Tue Jun 10, 2003 8:52 am

Re: CDM750 TX Alignment?

Postby jackhackett » Sat May 06, 2017 11:48 pm

As I recall R6.12.05 was the last version before you needed the entitlement key.

User avatar
SteveC0625
Posts: 445
Joined: Sat Jan 01, 2011 9:46 am
What radios do you own?: CDM's, CP's, CM's, and more

Re: CDM750 TX Alignment?

Postby SteveC0625 » Sun May 07, 2017 6:37 am

leaper54 wrote:I'm using the PRO CPS software R6.12.05. There is supposed to be a separate ' TX Align ' section I cannot find. Is this separate software? I need to raise the deviation. It seems to be hard limited to 3KC, even though I have the personalitiy set for 25KC spacing.


On the disc you received from Motorola or in the computer file you downloaded from MOL, there should be a separate Zip file called Global Tuner. There's no install procedure for it, just unpack it into a sub-directory on your CP and run it.

It's also still available at MOL --> Resource Center --> Software --> HT-EX and CDM. The most current version appears to be 2.18.0.


Return to “Radio Programming”

Who is online

Users browsing this forum: No registered users and 3 guests