Any luck with EX5/600 USB cables from Ebay?

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
Mraudio
Posts: 100
Joined: Sun Jan 27, 2008 6:48 am
What radios do you own?: Quantar/AS/A-spec./VertexP25

Any luck with EX5/600 USB cables from Ebay?

Post by Mraudio »

I came across an EX600 and dont have access to a cable for this one. Anyone have any luck with these chi-com usb cables on the EX pro series? I see some with 3 pin on the connector and some with 4 or 5. Leads me to believe they are junk?
Thanks for the assist
AD0JA
Posts: 66
Joined: Mon Jun 01, 2015 6:14 pm
What radios do you own?: APX6000, APX7000, Quantar, XPR

Re: Any luck with EX5/600 USB cables from Ebay?

Post by AD0JA »

Well I just ordered one with a serial connector straight from China. I've seen some with three pins, others with four, I would recommend buying the one with four pins.

Be careful because there are some mislabeled HT1250 cables being marketed for the EX series.
Post Reply

Return to “Radio Programming”