So I am trying to program in a wide area type ii trunking system into an MTX8000, now my issue is, the radio wont allow me any more than 4 control channels into the radio.
I read the programming manual, and it says that in the trunked system there is an option for "coverage type" but I don't get that ability for some reason in the RSS. I believe that is what I would need to change in order to add control channels to the system.
Any advice on what I am doing wrong, I have the current RSS running on a DOS computer with the system key enabled.
MTX8000 Control Channel Programming
Moderator: Queue Moderator
Re: MTX8000 Control Channel Programming
MTX8000 is a Privacy Plus / SmartNET radio. It will not allow more than 4 control channels. You need a SmartZone radio for that. Or better yet, how about a scanner for what you are doing...
-
- Posts: 1854
- Joined: Tue Jan 13, 2004 7:03 am
Re: MTX8000 Control Channel Programming
Not to mention that MTX8000s aren't rebanding-capable, so they're useless on almost every remaining 4.1 system still on the air in the US.
OP: toss that turd and get a MTS2000 from Ebay, they're going for like $30 or less.
OP: toss that turd and get a MTS2000 from Ebay, they're going for like $30 or less.