Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Accessing USB in DOS

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

User avatar
wavetar
Administrator
Posts: 7311
Joined: Sun Sep 09, 2001 4:00 pm

Accessing USB in DOS

Postby wavetar » Wed Apr 05, 2006 10:38 am

In the "Booting with USB" sticky thread, I detailed how to boot a computer into DOS using a USB flash drive. While useful for some, it only works for the latest computers with "boot from USB" as an option in the BIOS.

What about the other 95% of computers which are new enough to have a USB port, but cannot boot from them? Wouldn't it be nice to be able to take your Windows 2000/XP, NTFS formatted computer and somehow get access to all your DOS RSS on a USB stick?

There are several different ways to accomplish this...and I won't claim to understand all of them. The method that worked for me is outlined in the following article:

http://www.theinquirer.net/?article=10215

Basically, it involves copying a couple of driver files to your floppy bootdisk, and adding a couple of lines to your "config.sys" file.

Go to this site, and download the "motto hairu" zipped file:

http://www.stefan2000.com/darkehorse/PC ... ivers/USB/

Unzip the file, you will find 5 files:

DI1000DD.SYS
RAMFD.SYS
README.ENG
README.TXT
USBASPI.SYS

The highlighted files are the driver files we will be using. Ignore the "readme.txt" file, as it comes up gibberish...the "readme.eng" file is the english help file. The "RAMFD.SYS" is a third driver to use in special cases...read the help file for more info on that.

Take the USBASPI & DI1000DD files and copy them to your floppy bootdisk. Open the "config.sys" file on the floppy and add these two lines:

device=USBASPI.SYS
device=DI1000DD.SYS

That's all it took for me...I plugged the USB stick in and booted the computer with the floppy disk. It recognized the USB stick and assigned it a drive letter. I was able to run several RSS programs from the stick, and read/save archives. In short, awesome!

(minor edit)

USB access is slow unless you enable "smartdrv.exe" for the USB drive. So, you need to copy smartdrv.exe onto your boot floppy, and add the following line to your "autoexec.bat" file on the floppy:

A:\smartdrv.exe

This speeds things up significantly.

(/minor edit)



If the USB access method above doesn't work for you, you can read a good write-up on the subject with several different methods to try here:

http://www.bootdisk.com/usb.htm

Good luck,

Todd
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.

User avatar
HLA
Posts: 2334
Joined: Mon Jul 11, 2005 8:15 pm
What radios do you own?: HT1550's, X9000's, CDM1550's

Re: Accessing USB in DOS

Postby HLA » Sun Nov 25, 2007 11:57 am

does this work for other usb devices or have you just tried it on thumb drives?
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS

miodek1987
New User
Posts: 3
Joined: Wed Jun 03, 2015 2:01 am

Re: Accessing USB in DOS

Postby miodek1987 » Wed Jun 03, 2015 2:04 am

For me it worked with all USB devices.


Return to “Radio Programming”

Who is online

Users browsing this forum: No registered users and 1 guest