hello.
I'm looking for the details for the latest firmware for the gp360.
and what i need to do to change the firmware.
currently: SW Version R03.01.27
CP Version R4.05
gp360 firmware
Moderator: Queue Moderator
===========================================================
SOFTWARE RELEASE NOTE
===========================================================
Product : Professional GP300 Series FlashGrade Tool
Release : R03.07.05
Date : 29-May-2006
Language : English
===========================================================
PURPOSE OF THE RELEASE
===========================================================
Supported features:
- Reading Radio information
- Upgrade a radio to software version R03.07.05 from
previous released versions or new released version with
hardware codeplug update, saving of tuning data
and converting of application codeplug to Phase 3 layout
- Rated volume tuning value is increased for all R01.00.xx
versions and for R02.00.xx version upgraded and not re-tuned
before (only VHF, UHF1 and UHF2)
Supported Software versions:
- Only official radio software release version and bands.
In this version:
R01.00.04 .. R01.00.14, R01.00.17 .. R01.00.21, R02.00.18,
R02.00.20, R02.00.23, R02.00.27, R02.01.03, R02.02.01,
R02.02.03, R02.00.04, R03.00.28 .. R03.00.30, R03.01.00,
R03.01.02, R03.01.10, R03.01.17, R03.01.21, R03.01.22,
R03.01.25, R03.01.27, R03.01.31, R03.01.37, R03.02.00,
R03.02.07, R03.02.09, R03.02.11, R03.02.13, R03.02.15,
R03.02.16, R03.02.17, B03.03.02, B03.03.03, B03.04.01,
B03.04.02, R03.04.00, B03.04.03, R03.05.00, R03.06.00,
R03.07.05
software is updated to version R03.07.05
codeplug is updated from all previous versions to the latest
version (refer to the latest codeplug version information below)
===========================================================
HOW TO INSTALL AND RUN THIS SOFTWARE
===========================================================
Installation of the software can be completed by double clicking the setup
file "UpgradeTool_5T_Portable-R03.07.05.exe",and can be started through
Programs Menu.
Do NOT create a shortcut of the program e.g. on your desktop,the program
might not be able to find the data files in that case !
===========================================================
For the usage of this software the following radio accessories are required:
- Flash adapter, P/N HLN9742A or B
and (i)
- Radio Interface Box, P/N RLN4008
with battery or power supply
- RIB to PC cable, P/N 3080369B72 (9pin) or 3080369B71 (25pin)
- Programming/test cable, P/N RKN4074 (GP3xx, GP6xx, GP12xx)
- Programming/test cable, P/N MDJMKN4123 (GP344, GP388)
or (ii)
- RIBless programming cable, P/N RKN4075 (GP3xx, GP6xx, GP12xx)
By using equipment (i) the Flash adapter has to be connected between the
Radio Interface Box and the Programming/test cable. Maximum baud rate for
this equipment is 19,200 Bd.
By using equipment (ii) the Flash adapter has to be connected between the
PC and the RIBless programming cable.
For Flash Adapter HLN9742A, "Flash mode on" means switch position "ON".
For Flash Adapter HLN9742B, "Flash mode on" means switch position "A",
position "B" is not used for portable flashing.
===========================================================
RADIO SOFTWARE RELEASE NOTE
===========================================================
Release waris5t-R03.07.05
Previous Release waris5t-R03.06.00
Created on May 11 16:00:00 GMT 2006
Clearcase location /vobs/radios_mpt/platforms/waris5t/release/waris5t-R03.07.05
-------------------------------------------------------------------------------
=====================
SOFTWARE RELEASE NOTE
=====================
PRODUCT : WARIS 5T GP300 Series Portable Radio Firmware
ACCESS : Compass Web Page
http://compass.mot.com/go/196629141
CONTACT : Chebron Padmanaba
CCP070@email.mot.com
Tel: +604-6194423
VERSION : R03.07.05
DATE OF BUILD : 11-May-2006
Associated Part Numbers:
Description Part No.
WARIS Portable PLAIN-MINUS / POPULAR / PREFERRED Radios 51R07414A01R0108
SUPERTANAPAs Supported :-
Description Sales Model NO S/T CP Version
--------------------------------------------------------------------------------------------------------------------
GP320 PLAIN-MINUS VHF H25KDC9AN0 PMUD1492A 05.00
GP320 PLAIN-MINUS UHF H25RDC9AN0 PMUE1443A 05.00
GP320 LAZARUS PLAIN-MINUS VHF H25KDC9AN0 PMUD1492B 05.00
GP320 LAZARUS PLAIN-MINUS UHF H25RDC9AN0 PMUE1443B 05.00
GP340(GP329) POPULAR LB1 H25BEC9AN3 PMUB1015A 05.00
GP340(GP329) POPULAR LB2 H25CEC9AN3 PMUB1028A 05.00
GP340(GP329) POPULAR VHF H25KDC9AN3 PMUD1488A 05.00
GP340(GP329) LAZARUS POPULAR VHF H25KDC9AN3 PMUD1488B 05.00
GP340(GP329) LAZARUS EPP POPULAR VHF H25KDC9AN3 PMUD1488C 05.00
GP340(GP329) POPULAR 300 H25EDC9AN3 PMUD1546A 05.00
GP340(GP329) POPULAR UHF H25RDC9AN3 PMUE1440A 05.00
GP340(GP329) LAZARUS POPULAR UHF H25RDC9AN3 PMUE1440B 05.00
GP340(GP329) LAZARUS EPP POPULAR UHF H25RDC9AN3 PMUE1440C 05.00
GP340(GP329) POPULAR UHF2 H25SDC9AN3 PMUE1484A 05.00
GP340(GP329) LAZARUS POPULAR UHF2 H25SDC9AN3 PMUE1484B 05.00
GP340(GP329) LAZARUS EPP POPULAR UHF2 H25SDC9AN3 PMUE1484C 05.00
GP340(GP329) LAZARUS ATEX POPULAR VHF H25KCC4AN3 PMUD1974A 05.00
GP340(GP329) LAZARUS ATEX POPULAR VHF H25KCC6AN3 PMUD2050A 05.00
GP340(GP329) LAZARUS ATEX POPULAR UHF H25RCC4AN3 PMUE2218B 05.00
GP340(GP329) LAZARUS ATEX POPULAR UHF H25RCC6AN3 PMUE2258B 05.00
GP340(GP329) LAZARUS ATEX EPP POPULAR UHF H25RCC4AN3 PMUE2218C 05.00
GP340(GP329) LAZARUS ATEX EPP POPULAR UHF H25RCC6AN3 PMUE2258C 05.00
GP346(GP329Plus) MINNOW POPULAR VHF H38KDC9AN3 PMUD1742B 05.00
GP346(GP329Plus) MINNOW EPP POPULAR VHF H38KDC9AN3 PMUD1742C 05.00
GP346(GP329Plus) MINNOW POPULAR UHF H38RDC9AN3 PMUE1817B 05.00
GP346(GP329Plus) MINNOW EPP POPULAR UHF H38RDC9AN3 PMUE1817C 05.00
GP346(GP329Plus) MINNOW POPULAR UHF2 H38SDC9AN3 PMUE1819B 05.00
GP346(GP329Plus) MINNOW EPP POPULAR UHF2 H38SDC9AN3 PMUE1819C 05.00
GP360 PREFERRED VHF H25KDF9AN5 PMUD1490A 05.00
GP360 LAZARUS PREFERRED VHF H25KDF9AN5 PMUD1490B 05.00
GP360 LAZARUS EPP PREFERRED VHF H25KDF9AN5 PMUD1490C 05.00
GP360 PREFERRED UHF H25RDF9AN5 PMUE1444A 05.00
GP360 LAZARUS PREFERRED UHF H25RDF9AN5 PMUE1444B 05.00
GP360 LAZARUS EPP PREFERRED UHF H25RDF9AN5 PMUE1444C 05.00
GP380(GP339) PREFERRED LB1 H25BEH9AN6 PMUB1042A 05.00
GP380(GP339) PREFERRED LB2 H25CEH9AN6 PMUB1043A 05.00
GP380(GP339) PREFERRED VHF H25KDH9AN6 PMUD1489A 05.00
GP380(GP339) LAZARUS PREFERRED VHF H25KDH9AN6 PMUD1489B 05.00
GP380(GP339) LAZARUS EPP PREFERRED VHF H25KDH9AN6 PMUD1489C 05.00
GP380(GP339) PREFERRED UHF H25RDH9AN6 PMUE1441A 05.00
GP380(GP339) LAZARUS PREFERRED UHF H25RDH9AN6 PMUE1441B 05.00
GP380(GP339) LAZARUS EPP PREFERRED UHF H25RDH9AN6 PMUE1441C 05.00
GP380(GP339) PREFERRED UHF2 H25SDH9AN6 PMUE1485A 05.00
GP380(GP339) LAZARUS PREFERRED UHF2 H25SDH9AN6 PMUE1485B 05.00
GP380(GP339) LAZARUS EPP PREFERRED UHF2 H25SDH9AN6 PMUE1485C 05.00
GP380(GP339) LAZARUS ATEX PREFFERED VHF H25KCH4AN6 PMUD1973A 05.00
GP380(GP339) LAZARUS ATEX PREFFERED VHF H25KCH6AN6 PMUD2049A 05.00
GP380(GP339) LAZARUS ATEX PREFFERED UHF H25RCH4AN6 PMUE2217B 05.00
GP380(GP339) LAZARUS ATEX PREFFERED UHF H25RCH6AN6 PMUE2257B 05.00
GP380(GP339) LAZARUS ATEX EPP PREFFERED UHF H25RCH4AN6 PMUE2217C 05.00
GP380(GP339) LAZARUS ATEX EPP PREFFERED UHF H25RCH6AN6 PMUE2257C 05.00
GP386(GP339Plus) MINNOW PREFERRED VHF H38KDH9AN6 PMUD1743B 05.00
GP386(GP339Plus) MINNOW PREFERRED VHF H38KDH9AN6 PMUD1743C 05.00
GP386(GP339Plus) MINNOW PREFERRED UHF H38RDH9AN6 PMUE1818B 05.00
GP386(GP339Plus) MINNOW EPP PREFERRED UHF H38RDH9AN6 PMUE1818C 05.00
GP386(GP339Plus) MINNOW PREFERRED UHF2 H38SDH9AN6 PMUE1820B 05.00
GP386(GP339Plus) MINNOW EPP PREFERRED UHF2 H38SDH9AN6 PMUE1820C 05.00
===================
ASSOCIATED SOFTWARE
===================
CODEPLUG COMPATIBILITY : R03.07.02
CPS COMPATIBILITY : R03.05.00 or newer
====================
NEW FEATURES / NOTES
====================
Problems solved since previous Release (R03.06.00)
Enhancements:
1) CCB313: Vote Scan Enhancement
Description: 1. Make the following 2 program buttons function when pressed under
active vote scan state or active normal scan state:
a) Backlight
b) Keypad Lock
2. If the option "auto acknowledge in scan" and "voted enable" in scan
sheet are both enabled, acknowledge can be sent when radio decode a
sequence successfully. All the actions and limitation should follow
which on normal scan channel.
3. A new option "Display voted channel on receive" will be added. If this
option is enabled and radio is on a vote channel, it should display the
voted channel alias when receive landed. While radio performs voted
scan, the scan sub-menu should be masked from the menu when radio is
voting scan.
4. If keypad is enabled to a radio, and set the keypad mode to "channel",
allows channel selection by entering the channel number via the keypad
and using the green 'Tick' button under both active vote scan and
active normal scan.
5. "Memory channel buttons" function implementation in portable radio which
allows the user to program channels onto a maximum of two channel select
buttons. A displayed channel is programmed to a button by holding
the button pressed for at least 1 second (1050ms).
2) CCB317: Provide a programmable option to disable the channel knob function
of display model, GP339 and GP339 Plus.
Description: The behavior of this feature should similar as feature Keypad Lock.
When the rotary knob is disabled, rotating the knob will not cause
the Radio to change to other channel. When the rotary knob is enabled,
the knob will function as normal.
Issues Fixed:
1) CDDts08809: Radio reset or halt during few PTT button press continuously
Description: Under certain CPS setting, when PTT button is pressed repeatedly,
the radio will reset or halt.
2) RGPRG00000133: The memory channel button will be locked on portable after keypad lock
button pressing
Description: On waris5t portable, after we press keypad lock button, the memory channel
button will also be locked. However on waris5t mobile radio, the memory
channel button still can function even keypad locked. The mobile radio's
behavior is correct.
=================
Config Byte Usage
=================
Config Byte 1:
--------------
bit0 - set
switch off the backlight of control head A
R03.01.10
bit1 - set
enable a Data PTT TX time-out-timer
The regular Time-Out-Timer mode is then also valid
for fast data PTT.
R03.02.00
bit2 - set
When battery voltage level below the error tone threshold,
the long tone will NOT sound in Tx mode, and battery gauge
will also be freezed while TX. (Portable only)
D03.02.12
bit3 - set
Radio will narrow the default decode tone Min/Max duration to
avoid radio displaying garbage info and reseting issue for system
pre-defined signaling systems.
- cleared
Radio will work in original manner for system pre-defined signaling systems.
D03.02.13
bit4 - set
The start alert will sound on both power on and reset.
- cleared
The start alert will only sound on power on.
D03.02.27
bit5 - set
The enhanced external alarm is configured by setting this bit and programming
GPIO pin 4 to external alarm. The GPIO pin 4 will become active for about 2
seconds after power up delay timer expired. After the 2 seconds timer expired,
if there is not any change requested for the pin4, the pin4 will become inactive.
If there is any change requested for the pin4, the pin4 will become to the latest
change status.
- cleared
The external alarm will act as normal mode, i.e. the GPIO pin 4 will not
become active for about 2 seconds after power up delay timer expired.
Note: Only available for mobiles
R03.07.05
bit6 - set
When the user presses the "Keypad lock" button after feature "Keypad Enable" is
enabled, the keypad is locked and the knob rotary is disabled. Pressing the button
again will recover the keypad and the knob rotary.
- cleared
When the user presses the "Keypad lock" button after feature "Keypad Enable" is
enabled, the "Keypad Lock" button function should be the same as before, i.e. the
keypad is locked but the knob rotary is enabled. Pressing the button again will
recover the keypad.
Note: Only available for display portables
R03.07.05
Config Byte 2:
--------------
bit0 - set
decoder time-out-time (MAX) limitation
to system tone duration + 10 ms
R03.01.22
bit1 - set
decoder integration time (MIN) limitation
to 0.9 * system tone duration
R03.01.22
bit2 - set
The squelch is debounced by four more cycles
(5 instead of 1) to avoid radio resets caused
by a message queue overflow when the squelch flutters.
D03.05.01
bit3 - set
When decoding a "Cleardown" sequence without any
address digits and/or status digits the radio displays
"Call Received".
This is the behaviour up to R03.01.27.
- cleared
When decoding a "Cleardown" sequence without any
address digits and/or status digits the radio does not
change the display.
This is the new behaviour at R03.01.31.
bit4 - set
Decoded Group Call sequences which contain variable address digits
will not be copied into the Missed Calls List.
R03.02.00
bit5 - set
Fast data PTT is disabled if rekey inhibit timer duration is set to a non-zero
value.
- cleared
Fast data ptt is not affected by rekey inhibit timer duration setting. However,
rekey inhibit timer will not have effect on fast data ptt TOT timeout.
R03.07.05
Config Byte 3:
--------------
bit0 - set
If encapsolated mode enabled, radio will only handle the PROIS commands which
started with $7F.
R03.04.00
bit2 - set
When the radio has changed from Rx mode to Tx mode, a $01 PROIS command will be
sent to the option board to indicate a CTS.
- cleared
A $01 PROIS command will be sent to the option board to indicate a CTS only when
a channel is ready for voice or data transmittal, ie, one of following conditions
are matched:
1. PTT is pressed when PTT is controlled by radio, and sending telegram on this
channel is finished.
2. PTT is pressed by option board, and sending telegram on this channel is
finished.
R03.04.00
bit3 - set
During vote scan, radio will vote the carrier without unmuting the speaker, and
will unmute the speaker if both carrier and correct PL are present.The Invalid
Channel Marking feature will be disabled.
D03.04.01
bit4 - set
radio can record the voice from RSM or other voice accessories with MIC installed
D03.04.01
bit5 - set
Disable feature saving feature enhancement that is introduced since R03.02.07.
D03.05.01
Config Byte 4: not used
--------------
Config Byte 5: not used
--------------
=================
Build Environment
=================
Build Label : Waris5t_FW_Port_R03.07.05
Operating System : HP-UX B11.00
Configuration Management Tool : ClearCase by Atria Software Inc.
ClearCase version 2002.05.00 (Tue Oct 30 09:18:29 EST 2001)
clearcase_p2002.05.00-24 (Tue May 27 06:38:24 EDT 2003)
multisite_p2002.05.00-7 (Thu May 22 06:13:34 EDT 2003)
clearcase_p2002.05.00-23 (Fri May 23 06:35:53 EDT 2003)
clearcase_p2002.05.00-26 (Wed Aug 06 14:46:23 EDT 2003)
multisite_p2002.05.00-8 (Wed Aug 06 08:06:57 EDT 2003)
clearcase_p2002.05.00-35 (Fri Jun 04 13:33:01 EDT 2004)
clearcase_p2002.05.00-36 (Fri Jun 04 15:39:57 EDT 2004)
@(#) MVFS version 2002.05.00 (Sun Apr 11 05:15:23 EDT 2004)
cleartool 2002.05.00+ (Sun Apr 11 04:31:10 EDT 2004)
db_server 2002.05.00+ (Sun Apr 11 04:11:55 EDT 2004)
Compiler / Assembler : Introl 3.10
VOBs :
/vobs/radios_mpt/compilers
/vobs/radios_mpt/kernel
/vobs/radios_mpt/lc_vris
/vobs/radios_mpt/protocols
/vobs/radios_mpt/platforms
SOFTWARE RELEASE NOTE
===========================================================
Product : Professional GP300 Series FlashGrade Tool
Release : R03.07.05
Date : 29-May-2006
Language : English
===========================================================
PURPOSE OF THE RELEASE
===========================================================
Supported features:
- Reading Radio information
- Upgrade a radio to software version R03.07.05 from
previous released versions or new released version with
hardware codeplug update, saving of tuning data
and converting of application codeplug to Phase 3 layout
- Rated volume tuning value is increased for all R01.00.xx
versions and for R02.00.xx version upgraded and not re-tuned
before (only VHF, UHF1 and UHF2)
Supported Software versions:
- Only official radio software release version and bands.
In this version:
R01.00.04 .. R01.00.14, R01.00.17 .. R01.00.21, R02.00.18,
R02.00.20, R02.00.23, R02.00.27, R02.01.03, R02.02.01,
R02.02.03, R02.00.04, R03.00.28 .. R03.00.30, R03.01.00,
R03.01.02, R03.01.10, R03.01.17, R03.01.21, R03.01.22,
R03.01.25, R03.01.27, R03.01.31, R03.01.37, R03.02.00,
R03.02.07, R03.02.09, R03.02.11, R03.02.13, R03.02.15,
R03.02.16, R03.02.17, B03.03.02, B03.03.03, B03.04.01,
B03.04.02, R03.04.00, B03.04.03, R03.05.00, R03.06.00,
R03.07.05
software is updated to version R03.07.05
codeplug is updated from all previous versions to the latest
version (refer to the latest codeplug version information below)
===========================================================
HOW TO INSTALL AND RUN THIS SOFTWARE
===========================================================
Installation of the software can be completed by double clicking the setup
file "UpgradeTool_5T_Portable-R03.07.05.exe",and can be started through
Programs Menu.
Do NOT create a shortcut of the program e.g. on your desktop,the program
might not be able to find the data files in that case !
===========================================================
For the usage of this software the following radio accessories are required:
- Flash adapter, P/N HLN9742A or B
and (i)
- Radio Interface Box, P/N RLN4008
with battery or power supply
- RIB to PC cable, P/N 3080369B72 (9pin) or 3080369B71 (25pin)
- Programming/test cable, P/N RKN4074 (GP3xx, GP6xx, GP12xx)
- Programming/test cable, P/N MDJMKN4123 (GP344, GP388)
or (ii)
- RIBless programming cable, P/N RKN4075 (GP3xx, GP6xx, GP12xx)
By using equipment (i) the Flash adapter has to be connected between the
Radio Interface Box and the Programming/test cable. Maximum baud rate for
this equipment is 19,200 Bd.
By using equipment (ii) the Flash adapter has to be connected between the
PC and the RIBless programming cable.
For Flash Adapter HLN9742A, "Flash mode on" means switch position "ON".
For Flash Adapter HLN9742B, "Flash mode on" means switch position "A",
position "B" is not used for portable flashing.
===========================================================
RADIO SOFTWARE RELEASE NOTE
===========================================================
Release waris5t-R03.07.05
Previous Release waris5t-R03.06.00
Created on May 11 16:00:00 GMT 2006
Clearcase location /vobs/radios_mpt/platforms/waris5t/release/waris5t-R03.07.05
-------------------------------------------------------------------------------
=====================
SOFTWARE RELEASE NOTE
=====================
PRODUCT : WARIS 5T GP300 Series Portable Radio Firmware
ACCESS : Compass Web Page
http://compass.mot.com/go/196629141
CONTACT : Chebron Padmanaba
CCP070@email.mot.com
Tel: +604-6194423
VERSION : R03.07.05
DATE OF BUILD : 11-May-2006
Associated Part Numbers:
Description Part No.
WARIS Portable PLAIN-MINUS / POPULAR / PREFERRED Radios 51R07414A01R0108
SUPERTANAPAs Supported :-
Description Sales Model NO S/T CP Version
--------------------------------------------------------------------------------------------------------------------
GP320 PLAIN-MINUS VHF H25KDC9AN0 PMUD1492A 05.00
GP320 PLAIN-MINUS UHF H25RDC9AN0 PMUE1443A 05.00
GP320 LAZARUS PLAIN-MINUS VHF H25KDC9AN0 PMUD1492B 05.00
GP320 LAZARUS PLAIN-MINUS UHF H25RDC9AN0 PMUE1443B 05.00
GP340(GP329) POPULAR LB1 H25BEC9AN3 PMUB1015A 05.00
GP340(GP329) POPULAR LB2 H25CEC9AN3 PMUB1028A 05.00
GP340(GP329) POPULAR VHF H25KDC9AN3 PMUD1488A 05.00
GP340(GP329) LAZARUS POPULAR VHF H25KDC9AN3 PMUD1488B 05.00
GP340(GP329) LAZARUS EPP POPULAR VHF H25KDC9AN3 PMUD1488C 05.00
GP340(GP329) POPULAR 300 H25EDC9AN3 PMUD1546A 05.00
GP340(GP329) POPULAR UHF H25RDC9AN3 PMUE1440A 05.00
GP340(GP329) LAZARUS POPULAR UHF H25RDC9AN3 PMUE1440B 05.00
GP340(GP329) LAZARUS EPP POPULAR UHF H25RDC9AN3 PMUE1440C 05.00
GP340(GP329) POPULAR UHF2 H25SDC9AN3 PMUE1484A 05.00
GP340(GP329) LAZARUS POPULAR UHF2 H25SDC9AN3 PMUE1484B 05.00
GP340(GP329) LAZARUS EPP POPULAR UHF2 H25SDC9AN3 PMUE1484C 05.00
GP340(GP329) LAZARUS ATEX POPULAR VHF H25KCC4AN3 PMUD1974A 05.00
GP340(GP329) LAZARUS ATEX POPULAR VHF H25KCC6AN3 PMUD2050A 05.00
GP340(GP329) LAZARUS ATEX POPULAR UHF H25RCC4AN3 PMUE2218B 05.00
GP340(GP329) LAZARUS ATEX POPULAR UHF H25RCC6AN3 PMUE2258B 05.00
GP340(GP329) LAZARUS ATEX EPP POPULAR UHF H25RCC4AN3 PMUE2218C 05.00
GP340(GP329) LAZARUS ATEX EPP POPULAR UHF H25RCC6AN3 PMUE2258C 05.00
GP346(GP329Plus) MINNOW POPULAR VHF H38KDC9AN3 PMUD1742B 05.00
GP346(GP329Plus) MINNOW EPP POPULAR VHF H38KDC9AN3 PMUD1742C 05.00
GP346(GP329Plus) MINNOW POPULAR UHF H38RDC9AN3 PMUE1817B 05.00
GP346(GP329Plus) MINNOW EPP POPULAR UHF H38RDC9AN3 PMUE1817C 05.00
GP346(GP329Plus) MINNOW POPULAR UHF2 H38SDC9AN3 PMUE1819B 05.00
GP346(GP329Plus) MINNOW EPP POPULAR UHF2 H38SDC9AN3 PMUE1819C 05.00
GP360 PREFERRED VHF H25KDF9AN5 PMUD1490A 05.00
GP360 LAZARUS PREFERRED VHF H25KDF9AN5 PMUD1490B 05.00
GP360 LAZARUS EPP PREFERRED VHF H25KDF9AN5 PMUD1490C 05.00
GP360 PREFERRED UHF H25RDF9AN5 PMUE1444A 05.00
GP360 LAZARUS PREFERRED UHF H25RDF9AN5 PMUE1444B 05.00
GP360 LAZARUS EPP PREFERRED UHF H25RDF9AN5 PMUE1444C 05.00
GP380(GP339) PREFERRED LB1 H25BEH9AN6 PMUB1042A 05.00
GP380(GP339) PREFERRED LB2 H25CEH9AN6 PMUB1043A 05.00
GP380(GP339) PREFERRED VHF H25KDH9AN6 PMUD1489A 05.00
GP380(GP339) LAZARUS PREFERRED VHF H25KDH9AN6 PMUD1489B 05.00
GP380(GP339) LAZARUS EPP PREFERRED VHF H25KDH9AN6 PMUD1489C 05.00
GP380(GP339) PREFERRED UHF H25RDH9AN6 PMUE1441A 05.00
GP380(GP339) LAZARUS PREFERRED UHF H25RDH9AN6 PMUE1441B 05.00
GP380(GP339) LAZARUS EPP PREFERRED UHF H25RDH9AN6 PMUE1441C 05.00
GP380(GP339) PREFERRED UHF2 H25SDH9AN6 PMUE1485A 05.00
GP380(GP339) LAZARUS PREFERRED UHF2 H25SDH9AN6 PMUE1485B 05.00
GP380(GP339) LAZARUS EPP PREFERRED UHF2 H25SDH9AN6 PMUE1485C 05.00
GP380(GP339) LAZARUS ATEX PREFFERED VHF H25KCH4AN6 PMUD1973A 05.00
GP380(GP339) LAZARUS ATEX PREFFERED VHF H25KCH6AN6 PMUD2049A 05.00
GP380(GP339) LAZARUS ATEX PREFFERED UHF H25RCH4AN6 PMUE2217B 05.00
GP380(GP339) LAZARUS ATEX PREFFERED UHF H25RCH6AN6 PMUE2257B 05.00
GP380(GP339) LAZARUS ATEX EPP PREFFERED UHF H25RCH4AN6 PMUE2217C 05.00
GP380(GP339) LAZARUS ATEX EPP PREFFERED UHF H25RCH6AN6 PMUE2257C 05.00
GP386(GP339Plus) MINNOW PREFERRED VHF H38KDH9AN6 PMUD1743B 05.00
GP386(GP339Plus) MINNOW PREFERRED VHF H38KDH9AN6 PMUD1743C 05.00
GP386(GP339Plus) MINNOW PREFERRED UHF H38RDH9AN6 PMUE1818B 05.00
GP386(GP339Plus) MINNOW EPP PREFERRED UHF H38RDH9AN6 PMUE1818C 05.00
GP386(GP339Plus) MINNOW PREFERRED UHF2 H38SDH9AN6 PMUE1820B 05.00
GP386(GP339Plus) MINNOW EPP PREFERRED UHF2 H38SDH9AN6 PMUE1820C 05.00
===================
ASSOCIATED SOFTWARE
===================
CODEPLUG COMPATIBILITY : R03.07.02
CPS COMPATIBILITY : R03.05.00 or newer
====================
NEW FEATURES / NOTES
====================
Problems solved since previous Release (R03.06.00)
Enhancements:
1) CCB313: Vote Scan Enhancement
Description: 1. Make the following 2 program buttons function when pressed under
active vote scan state or active normal scan state:
a) Backlight
b) Keypad Lock
2. If the option "auto acknowledge in scan" and "voted enable" in scan
sheet are both enabled, acknowledge can be sent when radio decode a
sequence successfully. All the actions and limitation should follow
which on normal scan channel.
3. A new option "Display voted channel on receive" will be added. If this
option is enabled and radio is on a vote channel, it should display the
voted channel alias when receive landed. While radio performs voted
scan, the scan sub-menu should be masked from the menu when radio is
voting scan.
4. If keypad is enabled to a radio, and set the keypad mode to "channel",
allows channel selection by entering the channel number via the keypad
and using the green 'Tick' button under both active vote scan and
active normal scan.
5. "Memory channel buttons" function implementation in portable radio which
allows the user to program channels onto a maximum of two channel select
buttons. A displayed channel is programmed to a button by holding
the button pressed for at least 1 second (1050ms).
2) CCB317: Provide a programmable option to disable the channel knob function
of display model, GP339 and GP339 Plus.
Description: The behavior of this feature should similar as feature Keypad Lock.
When the rotary knob is disabled, rotating the knob will not cause
the Radio to change to other channel. When the rotary knob is enabled,
the knob will function as normal.
Issues Fixed:
1) CDDts08809: Radio reset or halt during few PTT button press continuously
Description: Under certain CPS setting, when PTT button is pressed repeatedly,
the radio will reset or halt.
2) RGPRG00000133: The memory channel button will be locked on portable after keypad lock
button pressing
Description: On waris5t portable, after we press keypad lock button, the memory channel
button will also be locked. However on waris5t mobile radio, the memory
channel button still can function even keypad locked. The mobile radio's
behavior is correct.
=================
Config Byte Usage
=================
Config Byte 1:
--------------
bit0 - set
switch off the backlight of control head A
R03.01.10
bit1 - set
enable a Data PTT TX time-out-timer
The regular Time-Out-Timer mode is then also valid
for fast data PTT.
R03.02.00
bit2 - set
When battery voltage level below the error tone threshold,
the long tone will NOT sound in Tx mode, and battery gauge
will also be freezed while TX. (Portable only)
D03.02.12
bit3 - set
Radio will narrow the default decode tone Min/Max duration to
avoid radio displaying garbage info and reseting issue for system
pre-defined signaling systems.
- cleared
Radio will work in original manner for system pre-defined signaling systems.
D03.02.13
bit4 - set
The start alert will sound on both power on and reset.
- cleared
The start alert will only sound on power on.
D03.02.27
bit5 - set
The enhanced external alarm is configured by setting this bit and programming
GPIO pin 4 to external alarm. The GPIO pin 4 will become active for about 2
seconds after power up delay timer expired. After the 2 seconds timer expired,
if there is not any change requested for the pin4, the pin4 will become inactive.
If there is any change requested for the pin4, the pin4 will become to the latest
change status.
- cleared
The external alarm will act as normal mode, i.e. the GPIO pin 4 will not
become active for about 2 seconds after power up delay timer expired.
Note: Only available for mobiles
R03.07.05
bit6 - set
When the user presses the "Keypad lock" button after feature "Keypad Enable" is
enabled, the keypad is locked and the knob rotary is disabled. Pressing the button
again will recover the keypad and the knob rotary.
- cleared
When the user presses the "Keypad lock" button after feature "Keypad Enable" is
enabled, the "Keypad Lock" button function should be the same as before, i.e. the
keypad is locked but the knob rotary is enabled. Pressing the button again will
recover the keypad.
Note: Only available for display portables
R03.07.05
Config Byte 2:
--------------
bit0 - set
decoder time-out-time (MAX) limitation
to system tone duration + 10 ms
R03.01.22
bit1 - set
decoder integration time (MIN) limitation
to 0.9 * system tone duration
R03.01.22
bit2 - set
The squelch is debounced by four more cycles
(5 instead of 1) to avoid radio resets caused
by a message queue overflow when the squelch flutters.
D03.05.01
bit3 - set
When decoding a "Cleardown" sequence without any
address digits and/or status digits the radio displays
"Call Received".
This is the behaviour up to R03.01.27.
- cleared
When decoding a "Cleardown" sequence without any
address digits and/or status digits the radio does not
change the display.
This is the new behaviour at R03.01.31.
bit4 - set
Decoded Group Call sequences which contain variable address digits
will not be copied into the Missed Calls List.
R03.02.00
bit5 - set
Fast data PTT is disabled if rekey inhibit timer duration is set to a non-zero
value.
- cleared
Fast data ptt is not affected by rekey inhibit timer duration setting. However,
rekey inhibit timer will not have effect on fast data ptt TOT timeout.
R03.07.05
Config Byte 3:
--------------
bit0 - set
If encapsolated mode enabled, radio will only handle the PROIS commands which
started with $7F.
R03.04.00
bit2 - set
When the radio has changed from Rx mode to Tx mode, a $01 PROIS command will be
sent to the option board to indicate a CTS.
- cleared
A $01 PROIS command will be sent to the option board to indicate a CTS only when
a channel is ready for voice or data transmittal, ie, one of following conditions
are matched:
1. PTT is pressed when PTT is controlled by radio, and sending telegram on this
channel is finished.
2. PTT is pressed by option board, and sending telegram on this channel is
finished.
R03.04.00
bit3 - set
During vote scan, radio will vote the carrier without unmuting the speaker, and
will unmute the speaker if both carrier and correct PL are present.The Invalid
Channel Marking feature will be disabled.
D03.04.01
bit4 - set
radio can record the voice from RSM or other voice accessories with MIC installed
D03.04.01
bit5 - set
Disable feature saving feature enhancement that is introduced since R03.02.07.
D03.05.01
Config Byte 4: not used
--------------
Config Byte 5: not used
--------------
=================
Build Environment
=================
Build Label : Waris5t_FW_Port_R03.07.05
Operating System : HP-UX B11.00
Configuration Management Tool : ClearCase by Atria Software Inc.
ClearCase version 2002.05.00 (Tue Oct 30 09:18:29 EST 2001)
clearcase_p2002.05.00-24 (Tue May 27 06:38:24 EDT 2003)
multisite_p2002.05.00-7 (Thu May 22 06:13:34 EDT 2003)
clearcase_p2002.05.00-23 (Fri May 23 06:35:53 EDT 2003)
clearcase_p2002.05.00-26 (Wed Aug 06 14:46:23 EDT 2003)
multisite_p2002.05.00-8 (Wed Aug 06 08:06:57 EDT 2003)
clearcase_p2002.05.00-35 (Fri Jun 04 13:33:01 EDT 2004)
clearcase_p2002.05.00-36 (Fri Jun 04 15:39:57 EDT 2004)
@(#) MVFS version 2002.05.00 (Sun Apr 11 05:15:23 EDT 2004)
cleartool 2002.05.00+ (Sun Apr 11 04:31:10 EDT 2004)
db_server 2002.05.00+ (Sun Apr 11 04:11:55 EDT 2004)
Compiler / Assembler : Introl 3.10
VOBs :
/vobs/radios_mpt/compilers
/vobs/radios_mpt/kernel
/vobs/radios_mpt/lc_vris
/vobs/radios_mpt/protocols
/vobs/radios_mpt/platforms