I was hoping with all the brains around here someone could help me out.
I just got myself a used HT1250 and have programmed it. The problem is when in my first zone it seems to be stuck in a scan mode (I cannot turn it off using the key programmed to or the menu) and it is stuck in scan on the first channel of the second zone.
Any ideas?
Thanks in advance.
HT1250 Stuck in Scan Mode
Moderator: Queue Moderator
Re: HT1250 Stuck in Scan Mode
That conventional personality(on the first channel of the second zone) under the scan tab must have the "Auto Scan" box checked.
Is so uncheck it and reprogram and you should be good to go.
Is so uncheck it and reprogram and you should be good to go.
fineshot1
NJ USA
NJ USA
Re: HT1250 Stuck in Scan Mode
Wow, how I missed that I don't know but thanks so much for the answer!
Re: HT1250 Stuck in Scan Mode
No problem. Always happy to help out when i can.NHEMT42 wrote:Wow, how I missed that I don't know but thanks so much for the answer!
fineshot1
NJ USA
NJ USA