XTS2500I Can't Program Multiple QCII Systems

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
madfrenchie
Posts: 96
Joined: Fri Jan 23, 2009 7:14 am
What radios do you own?: PM1500, APX 7000

XTS2500I Can't Program Multiple QCII Systems

Post by madfrenchie »

Hello,

I am using Astro 25 Portable CPS Version R14.00.00
I have a XTS2500I Radio H46KDH9PW7BN with a 407CGH**** Serial
This is a VHF Radio.

I currently set up 3 Quick Call systems with different AB Codes in each one. They are all 3 listed in the Qucik-CallII menu in the CPS.

When i edit a Conventional Personality, under the Signaling tab i have
Signaling Type: Quick-Call II
System Number: 1

If i click the drop box for System Number, i have all 3 system's listed, but as soon as I try to select System 2 or System 3, as soon as i let go of the mouse button it goes right back to System 1

I tried everything i could think of, even setting up all 3 systems to be exactly the same, but no matter what i do i can only select system 1.

The same thing happens when i use MDC Signaling.

I can only chose system 1, no matter what.


I also have 3 different Quick Call lists set up. I can choose either of the 3 lists, and that works fine, so i can tone out from different lists. Its just the signaling tab i can only ever select system 1

I hope i gave enough information for you smart guys to figure out what my problem is :)

Thank you ahead of time for your help!!
Top
User avatar
The Pager Geek
Posts: 1250
Joined: Fri Jun 21, 2002 10:31 pm
What radios do you own?: Disney FRS

Re: XTS2500I Can't Program Multiple QCII Systems

Post by The Pager Geek »

Your radio has been FPP crippled...

Only 1 system can be used with FPP. It is a CPS restriction.

tpg
Experienced Provider of Useless Information
Top
madfrenchie
Posts: 96
Joined: Fri Jan 23, 2009 7:14 am
What radios do you own?: PM1500, APX 7000

Re: XTS2500I Can't Program Multiple QCII Systems

Post by madfrenchie »

The Pager Geek wrote:Your radio has been FPP crippled...

Only 1 system can be used with FPP. It is a CPS restriction.

tpg
Ahh.. ok.

So if i take a zone that is not set up for FPP, I should be able to use a second system then? or am i stuck with one system radio wide because I have one zone with FPP?
Top
Post Reply

Return to “Radio Programming”