Nucleus - Problem with 927Mhz

This forum is for the discussions targeted at converting various models of Motorola equipment to operate in the 900MHz Amateur Band.

Moderator: Queue Moderator

Post Reply
ruynia
New User
Posts: 2
Joined: Fri Sep 19, 2014 6:35 pm

Nucleus - Problem with 927Mhz

Post by ruynia »

I have several nucleus 2's. Having a problem changing the frequency to 927 mhz. There is supposed to be a menu item to disable the range monitor but that menu item does not show up
in any of the nuc's I have. Any info would be appreciated.
BoBc
-WB4JLD
User avatar
d119
Posts: 3532
Joined: Tue Mar 19, 2002 4:00 pm

Re: Nucleus - Problem with 927Mhz

Post by d119 »

http://www.repeater-builder.com/rbtip/mojoindex.html

Search for "Nucleus". There are a couple of documents as well as a modification article.
ruynia
New User
Posts: 2
Joined: Fri Sep 19, 2014 6:35 pm

Re: Nucleus - Problem with 927Mhz

Post by ruynia »

Thanks for the link. I had already found that and read through the articles but they were no help
with disabling the range monitor. There is I know some super secret FIPS commands to get into the station control module.
(if anyone knows about them it would be really a great asset as there is beginning to be nuc2's available
on the surplus market) .

Once again, thanks very much for the reply.
73
BoBc
-WB4JLD
Post Reply

Return to “Converting Motorola Equipment to 900MHz Amateur”