900mhz PURC 5000

[N9CZV]

Does anyone have any ideas on how to program a PURC 5000 to 927.XXXX?

[n8obu]

what dose it do when you try to input the freq / i run uhf purc's and love them / did you pull the board out of the acb and switch s1 to on ? if i can be of any help email me .
n8obu@yahoo.com

[n8obu]

sorry to hear that its not an acb unit you could upgrade it but the parts are hard to find heres an link to someone that can program it for ya
http://www.brinkleyelectronics.com/prog/mot/motprog.htm
hope this helps n8obu

[N9CZV]

The Purc 5000 makes a fine transmitter for the repeater I mated it with a Darcom receiver and at 10,000 ft I can hear it in my office 40 miles away on my portible.

[Hartley]

Hi Dave,

If you're talking about Greens, I'm hearing it in a few places in Phoenix in my mobile! For about 3-4 miles along the 202 between the Priest exit and the 101 it comes up to DFQ in places - and a few other "spots" as well...

73 DE Hartley

[N9CZV]

Yes I am talking about greens peak I am running 80 watts I may have to turn it down.

[n_zero_ndp]

The Purc 5000 makes a fine transmitter for the repeater I mated it with a Darcom receiver and at 10,000 ft I can hear it in my office 40 miles away on my portible.

Is the DARCOM programmable? If so, what is the RSS version?
Air-Comm in Phoenix lists them on their website for $125
(rackmount version). Seems Like a great choice if it is programmable.
First remark I have seen from anyone using the DARCOM...

Thanks,
Ken in KC - NØNDP

[N9CZV]

It takes a 1801 suitcase programer



Dave Epley, N9CZV