Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Metering panel part number question

This forum is for the discussions targeted at converting various models of Motorola equipment to operate in the 900MHz Amateur Band.

Moderator: Queue Moderator

User avatar
dechief
New User
Posts: 16
Joined: Tue Aug 28, 2007 10:51 pm

Metering panel part number question

Postby dechief » Thu Mar 27, 2008 4:05 pm

I have a PURC 5000 with the TLN2419A super gee whiz metering panel but a couple of the switches are bad and I don't have a manual to look up the part numbers. The bad switches are labled D1 and D2 on the lower right front panel. They are made by C&K and have the number 7101 stamped on them. I went to the C&K web sight and there are a gazillion combinations and it would be easier to just order them from Motorola if I had the part numbers.

Thanks,
Jack
K6YC

Lake Effect
Posts: 311
Joined: Tue Dec 06, 2005 9:47 am

Re: Metering panel part number question

Postby Lake Effect » Fri Mar 28, 2008 4:37 am

D1 through D4 (S1202 - 1205 on the print) are all the same part number 4083685N04 in the parts list. I didn't check MOL to see if number is still good but the switch is a spdt that should be available at most suppliers.

L.E.

WB6DGN
Posts: 252
Joined: Fri Feb 11, 2005 5:34 pm

Re: Metering panel part number question

Postby WB6DGN » Sun Mar 30, 2008 11:34 pm

Switch is listed on AccessPoint as follows: SW TGL SPDT .4VA 20V BD MTG: with a list price of $10.25 each. Seems a bit expensive, but at least you don't have to spend a lot of time matching the physical characteristics.
Tom


Return to “Converting Motorola Equipment to 900MHz Amateur”

Who is online

Users browsing this forum: No registered users and 1 guest