Page 1 of 1

mtx9000 max channels?

Posted: Tue May 20, 2008 4:38 pm
by The Kreick
hi group~

I picked up a couple of no display mtx-9000's at dayton cheap. they program up a-ok, but they show only having 16 channels max. I can program much more personalities in to it & i was assuming i could do 3 zones of 16 channels each using the A-B-C switch (like my display top version)

Is there a way to up the max channels? bit-banging perhaps?


tnx,


joe K8ICV

Re: mtx9000 max channels?

Posted: Tue May 20, 2008 6:49 pm
by n7maq
The Kreick wrote:hi group~

I picked up a couple of no display mtx-9000's at dayton cheap. they program up a-ok, but they show only having 16 channels max. I can program much more personalities in to it & i was assuming i could do 3 zones of 16 channels each using the A-B-C switch (like my display top version)

Is there a way to up the max channels? bit-banging perhaps?


tnx,


joe K8ICV
Load in a MTS2000 codeplug. That is what I do to get 48. If you need a cp let me know. Will will need to check and most likely re-align.


Jim

Jim