XPR6580 Programming ERROR
Moderator: Queue Moderator
- 35-K9-1
- Posts: 106
- Joined: Sat Nov 22, 2014 6:35 pm
- What radios do you own?: XG-100F, VP900, VP600, APX7K
XPR6580 Programming ERROR
I am trying to program an XPR6580 and when I get try to input certain frequencies, I get an Error #1224 message. It says that it requires the Canada Full Frequency Range feature. Any help with this?? Thanks.
Re: XPR6580 Programming ERROR
Motorola does not want NPSPAC frequencies in the XPR6580.
- 35-K9-1
- Posts: 106
- Joined: Sat Nov 22, 2014 6:35 pm
- What radios do you own?: XG-100F, VP900, VP600, APX7K
Re: XPR6580 Programming ERROR
Okay. Thanks Jeff.
Re: XPR6580 Programming ERROR
BTW what CPS version are you using and is it the digital flash or the trunking flash? Motorola made a booboo with the trunking flash and it would allow NPSPAC frequencies and it wasn't fixed til 10.7 CPS IIRC............
-
- Posts: 1648
- Joined: Wed Apr 02, 2003 10:35 am
- What radios do you own?: APX XTS XTL TRBO 900MHZ
Re: XPR6580 Programming ERROR
You can always contact a friendly dealer in Canada to ask for the EID. GARY
- 35-K9-1
- Posts: 106
- Joined: Sat Nov 22, 2014 6:35 pm
- What radios do you own?: XG-100F, VP900, VP600, APX7K
Re: XPR6580 Programming ERROR
I'm using Version 10 build 5.
Re: XPR6580 Programming ERROR
If you are not using it for DMR and you don't need it out of band for ham 900mhz you should be able to flash it to the SZ flash and enter the NPSPAC frequencies