Page 1 of 1
XPR5350 - converting into a XPR5550
Posted: Tue Dec 30, 2014 12:37 pm
by g8tzl2004
Can you convert a basic XPR5350 into a full featured XPR5550 by swapping the basic XPR5350 head for the XPR5550 color display head and flashing with XPR5550 firmware?
Re: XPR5350 - converting into a XPR5550
Posted: Fri Jan 23, 2015 2:01 pm
by com501
Have you looked at the Detailed Service Manual for the two boards and compared them yet? Also, I am assuming you have Labtool 10 or better or something similar.
Re: XPR5350 - converting into a XPR5550
Posted: Thu Jan 29, 2015 8:24 am
by g8tzl2004
I don't have an XPR5350 to convert (yet). I just wondered whether in principle it is possible - like you can mod an XTL1500 into an XTL5000 by changing the head and flashing new firmware and features.
Re: XPR5350 - converting into a XPR5550
Posted: Fri Jan 30, 2015 7:27 am
by Forts
In theory it's likely possible... Good luck getting ahold of the Depot software to make it happen though.
Re: XPR5350 - converting into a XPR5550
Posted: Fri Jan 30, 2015 9:48 am
by escomm
com501 wrote:Have you looked at the Detailed Service Manual for the two boards and compared them yet? Also, I am assuming you have Labtool 10 or better or something similar.
Doubt he'll be getting his hands on that without an NDA