Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Channel steering on a XPR5500

Moderator: Queue Moderator

RFguy
Posts: 1294
Joined: Wed Dec 21, 2005 6:17 am

Channel steering on a XPR5500

Postby RFguy » Mon Mar 30, 2015 3:21 pm

Just wondering if anyone has used channel steering with a XPR5500 on a Capacity Plus system. I was wondering if there were any issues selecting individual talkgroups as opposed to conventional channels.

I "assume" that it uses standard binary type steering (below). I read in another thread that binary 001 was channel 1, not channel 2. Not a big deal as I just need to select between 5 talkgroups.

001 Chan 1
010 Chan 2
011 Chan 3
100 Chan 4
101 Chan 5
110 Chan 6
111 Chan 7

User avatar
FMROB
Posts: 999
Joined: Sun Jan 12, 2003 2:28 pm

Re: Channel steering on a XPR5500

Postby FMROB » Wed Apr 01, 2015 3:43 pm

Ill double down on the question, along the same lines. Is the 5550 capable of channel steer of 15 or 16 channels like the CDM? We use the CDM as control stations a lot, and I would assume the XPR will be taking its place in the near future?

Rob

User avatar
escomm
Queue Moderator
Posts: 5130
Joined: Fri Mar 24, 2006 8:24 pm

Re: Channel steering on a XPR5500

Postby escomm » Wed Apr 01, 2015 7:53 pm

Yes the XPR5550 will channel steer in conventional or capacity plus but I think for connect plus it may not work. Don't quote me but I know for sure on the XPR4000 series mobiles with the option board enabled you lost most of the accessory connector functions including COR


Return to “MotoTRBO Portables and Mobiles (4xxx/6xxx) 1.0 Series Subscribers”

Who is online

Users browsing this forum: No registered users and 1 guest