Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Mototrbo system

Moderator: Queue Moderator

johnny1225
Posts: 216
Joined: Thu Jul 22, 2004 8:27 am

Mototrbo system

Postby johnny1225 » Tue Jul 14, 2015 9:06 am

I have put in a Digital Capacity Plus sytem. (1) XPR8400 Repeater UHF and 25 XPR3500 Radios and (19) XPR6550. The problem is alot of the time when a user starts to transmit the receiving radios with miss the first 5-6 seconds of the call then will start receiving. The receiving radios will flash that it is receiving but no voice til 5-6 seconds after. What could be the problem with the issue??

Thanks
John

NE2WAY
Posts: 29
Joined: Wed Jan 19, 2011 5:40 pm
What radios do you own?: MT2000,Spectra,HT&CDM1250

Re: Mototrbo system

Postby NE2WAY » Wed Jul 15, 2015 4:28 pm

do you have battery saver on? if so turn it off and see if that solves your issue.

celltech25
Posts: 503
Joined: Fri Apr 29, 2005 3:54 am

Re: Mototrbo system

Postby celltech25 » Wed Jul 15, 2015 6:39 pm

Did you give each raido an individual ID that will happen if each subscriber doesnt have its own ID

johnny1225
Posts: 216
Joined: Thu Jul 22, 2004 8:27 am

Re: Mototrbo system

Postby johnny1225 » Thu Jul 16, 2015 3:26 am

yes it is a capacity plus system so i did give each radio its own ID.

rainbowpenguin
New User
Posts: 20
Joined: Sat Jul 11, 2015 7:07 am

Re: Mototrbo system

Postby rainbowpenguin » Fri Jul 17, 2015 8:08 am

Do you have privacy (encryption) enabled on the subscribers? If so, the repeater needs to be programmed for the same privacy type. Sometimes missing the first part of the call is a symptom of a repeater not having the same type of privacy enabled.

User avatar
MSS-Dave
Posts: 766
Joined: Mon Jun 30, 2003 6:02 pm
What radios do you own?: XTL5K, NX300, PD782, Spark Gap

Re: Mototrbo system

Postby MSS-Dave » Sat Jul 18, 2015 5:37 pm

Make sure repeaters and radios have the same firmware revisions applicable in them. At minimum, the repeaters. Had issue on 900 Cap Plus system where 2 of the 3 machines were 1 rev level apart due to a failure and a depot trip. Updated 2 older ones and all worked well.


Return to “MotoTRBO Portables and Mobiles (4xxx/6xxx) 1.0 Series Subscribers”

Who is online

Users browsing this forum: No registered users and 1 guest