Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

XPR5550 etc - lowering analog SQ level below default?

Moderator: Queue Moderator

g8tzl2004
Posts: 1082
Joined: Wed Sep 08, 2004 10:13 am

XPR5550 etc - lowering analog SQ level below default?

Postby g8tzl2004 » Mon Aug 14, 2017 9:37 am

Has anybody figured out how to lower the carrier SQ level on a UHF XPR5550 so that the carrier SQ opens on a very weak signal.

There are only 2 SQ levels - normal and tight and my "normal" level is set too high for very weak signals - if you open the SQ (to get white noise) you can copy a weak signal OK.

On my XPR5550. the LED actually lights up on RXing a really weak signal BUT the carrier SQ does not open....so the radio is detecting the weak signal but does not open the SQ until the signal is slightly stronger....so the weak but copyable signal is missed.

Return to “MotoTRBO Portables and Mobiles (4xxx/6xxx) 1.0 Series Subscribers”

Who is online

Users browsing this forum: No registered users and 1 guest