Page 1 of 1

XPR330 and 6350 sample codeplugs?

Posted: Mon Jan 15, 2018 10:21 am
by fogtee
Greetings all,

I was wondering if anyone has a sample blank codeplug for either of these 2 radios. I bought these for cheap at a ham fest and Id like to get them programmed for my sharkRF hotspot. I have the CPS software from MOL, but the radios are password protected. I was hoping flashing a new codeplug would bypass it. I don't care whats on there now, id just like to add my hotspot freq and talkgroups on there.

Re: XPR330 and 6350 sample codeplugs?

Posted: Mon Jan 15, 2018 1:48 pm
by RFguy
VHF? UHF?
Maybe post the model numbers so you get a correct codeplug.

Re: XPR330 and 6350 sample codeplugs?

Posted: Mon Jan 15, 2018 7:17 pm
by rainbowpenguin
In CPS, Device -> Recover

This will load a factory default codeplug, and get rid of the password.

Back up your tuning data beforehand just in case.

Re: XPR330 and 6350 sample codeplugs?

Posted: Tue Jan 16, 2018 9:57 am
by n1gtl
If you have MOL access, download the newest firmware upgrades, install the packages and select RECOVERY MODE. That will basically factory default the radios, wiping out the password.