Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

APX7500 Remote to Dash - What parts needed?

This forum is dedicated to discussions pertaining specifically to the Motorola ASTRO line of radios (those that use VSELP/IMBE/AMBE), including using digital modulation, digital programming, FlashPort upgrades, etc. If you have general questions please use the General or Programming forums.

Moderator: Queue Moderator

BBRadio
New User
Posts: 2
Joined: Fri Aug 15, 2014 5:21 am

APX7500 Remote to Dash - What parts needed?

Postby BBRadio » Tue Oct 28, 2014 8:06 am

If I have an APX7500 dual band remote mount set up, what are the necessary parts or kits to convert to a dashmount?
Could anyone please list the part numbers or kit no.?

JeffFireRadio
Posts: 303
Joined: Tue Feb 14, 2006 5:39 am

Re: APX7500 Remote to Dash - What parts needed?

Postby JeffFireRadio » Wed Nov 05, 2014 5:47 am

H1853B is the APX above-price-book kit that takes it the other way...dash to remote. Do a Google search and you'll find the one you're looking for. It's always in the immediate part number vicinity of the kit that goes the other way...i.e. H1852, H1854, etc. When you search, it might come up under a state contract or just a P25/Batlabs/RR forum question.

I just bought a kit from M going the other way, so if you're only doing one radio, I would have those parts still sitting in their box from my project. You end up with the leftovers and that happens to be what you need right now (flex and headbridge, if I remember). The direction you are going is much easier and less parts-intensive than going the other way. You are lucky.

Not exactly the answer you were looking for, but something helpful, I hope. Best wishes.


- Jeff

BBRadio
New User
Posts: 2
Joined: Fri Aug 15, 2014 5:21 am

Re: APX7500 Remote to Dash - What parts needed?

Postby BBRadio » Thu Nov 06, 2014 6:48 am

Thanks, Jeff. I actually have 21 of them to convert. The customer usually uses the remote mount configuration, therefore my company ordered remote. I'll check out a few options to get the parts.

Thanks,
Brandon

User avatar
escomm
Queue Moderator
Posts: 5130
Joined: Fri Mar 24, 2006 8:24 pm

Re: APX7500 Remote to Dash - What parts needed?

Postby escomm » Thu Nov 06, 2014 12:43 pm

All you need are HKN6206B (flex) and 1575769B01 (gasket)

This assumes the radios have an O5 or O7 control head and you will be removing the CHIB from the CHIA


Return to “Legacy Batboard Motorola ASTRO (VSELP/IMBE/AMBE) Equipment Forum”

Who is online

Users browsing this forum: No registered users and 1 guest