Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

COM 120B filter options syntax error

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

mogman
Posts: 123
Joined: Tue Aug 05, 2008 2:25 pm

COM 120B filter options syntax error

Postby mogman » Wed Jun 13, 2018 10:42 am

I am trying to re program the filter options in my 120B
Using the commands given by Wowbanger I continue to get syntax errors, example.
cal:eeprom:ifbw0 "300"
I have tried many different ways but have failed, the syntax error is in the ifbw0 portion of the command.
Thanks

DJP126
Posts: 864
Joined: Wed Jun 18, 2003 6:41 am
What radios do you own?: What's a radio?

Re: COM 120B filter options syntax error

Postby DJP126 » Wed Jun 13, 2018 7:15 pm

Just a WAG (Wild Ass Guess), did you try cal:eeprom:ifbw0:300 ?
Dave

mogman
Posts: 123
Joined: Tue Aug 05, 2008 2:25 pm

Re: COM 120B filter options syntax error

Postby mogman » Thu Jun 14, 2018 1:00 pm

Never got a chance, the last time I booted the machine the correct filters showed up, not sure why, maybe during initialization it detected them??
Any who all is well now........fingers crossed...

drb235
New User
Posts: 8
Joined: Thu Mar 08, 2018 4:11 pm
What radios do you own?: Mototrbo and Kenwood

Re: COM 120B filter options syntax error

Postby drb235 » Sat Jun 16, 2018 7:28 am

Hello I too have the same issue when I try to cal my filters. Any one have any suggestions. Thanks, David

lc4600
New User
Posts: 13
Joined: Mon Aug 03, 2009 7:29 am

Re: COM 120B filter options syntax error

Postby lc4600 » Sun Jun 24, 2018 12:21 pm

*idn?
syst:sec:stat 0
cal:stat 1
cal:eeprom:opt:IFBW1"15kHz" //15khz or 12.5kHz//
cal:eeprom:opt:IFBW2"12.5kHz
This is what I used when I upgraded to 12.5 kHz filter instead of 15kHz filter. *idn? is use to check connection to COM120B


Return to “Test Equipment & RF Equipment Alignment”

Who is online

Users browsing this forum: No registered users and 1 guest