ifr 1600s question

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
jhall
New User
Posts: 5
Joined: Mon Aug 15, 2011 3:07 pm

ifr 1600s question

Post by jhall »

With analyzer cables set together with a conector in the middle, from duplex out, to analyzer in, the display showes 2 to 4 db up from zero,is there a way to set it to zero?

Joel
Top
User avatar
Wowbagger
Aeroflex
Posts: 1287
Joined: Tue Dec 10, 2002 10:46 am

Re: ifr 1600s question

Post by Wowbagger »

You can set the tracking generator level to bring the level to zero. You should do that anyway, to account for any losses in the cables and connectors.
This is my opinion, not Aeroflex's.

I WILL NOT give you proprietary information. I make too much money to jeopardize my job.

I AM NOT the Service department: You want official info, manuals, service info, parts, calibration, etc., contact Aeroflex directly, please.
Top
Post Reply

Return to “Test Equipment & RF Equipment Alignment”