R2600 Won't Power Up

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
kf7meg
New User
Posts: 2
Joined: Sat Apr 21, 2012 12:45 pm

R2600 Won't Power Up

Post by kf7meg »

Has anybody with an R2600 had a power up problem that they fixed? My R2600 has been getting funny in the last few month's where it will power on, but it won't go through the start up calibration until the 3rd or 4th time you turn the power switch off and back on. Then it would run through the initial set up and be good to go. Now it won't come on at all. I can hear the relay click when I plug the unit into a 110 outlet, but the unit display will not come on at all. Any suggestions? Thanks in advance.

Ed Delahanty
KF7MEG
New Smyrna Beach, Fl
CircleBat
Posts: 171
Joined: Mon Oct 08, 2007 3:11 pm

Re: R2600 Won't Power Up

Post by CircleBat »

sounds like the caps on the power supply are shot... replace all the electrlytics with low esr caps.happened to my 2590... solved the problem
kf7meg
New User
Posts: 2
Joined: Sat Apr 21, 2012 12:45 pm

Re: R2600 Won't Power Up

Post by kf7meg »

Thankyou very much CircleBat.

Ed
Post Reply

Return to “Test Equipment & RF Equipment Alignment”