GPIB command reference - R200xD

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
owen
New User
Posts: 2
Joined: Sun Oct 14, 2012 10:06 pm

GPIB command reference - R200xD

Post by owen »

Hi All,

I have an R2009D and would like to locate a GPIB command reference guide.

Any hints?

Thanks
Owen
DJP126
Posts: 873
Joined: Wed Jun 18, 2003 6:41 am
What radios do you own?: What's a radio?

Re: GPIB command reference - R200xD

Post by DJP126 »

owen wrote:Hi All,

I have an R2009D and would like to locate a GPIB command reference guide.

Any hints?

Thanks
Owen
What you are looking for is the R2002D Users Manual. It will have all the commands for the "D" model. To get by with most of the commands, look at http://www.repeater-builder.com/motorol ... manual.pdf on page 202 of 248.
Dave
owen
New User
Posts: 2
Joined: Sun Oct 14, 2012 10:06 pm

Re: GPIB command reference - R200xD

Post by owen »

Thanks Dave and others.

I have the info you mentioned and have started learning how to drive the R2000 remotely. It has its quirks!

Interestingly, that info was not in another (I think later) edition of the service manual which refers to a separate document.

Thanks again.

Owen
davegr
New User
Posts: 1
Joined: Mon Jul 25, 2011 5:43 am

Re: GPIB command reference - R200xD

Post by davegr »

I'm also looking for the GPIB commands for the R2002D.
DJP126
Posts: 873
Joined: Wed Jun 18, 2003 6:41 am
What radios do you own?: What's a radio?

Re: GPIB command reference - R200xD

Post by DJP126 »

davegr wrote:I'm also looking for the GPIB commands for the R2002D.
As stated above.... To get by with most of the commands, look at http://www.repeater-builder.com/motorol ... manual.pdf on page 202 of 248.
Dave
Post Reply

Return to “Test Equipment & RF Equipment Alignment”