Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

.125a fuses for RF in R2200, etc.

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

davelane
New User
Posts: 4
Joined: Mon Jun 06, 2016 11:22 am

.125a fuses for RF in R2200, etc.

Postby davelane » Wed Jun 29, 2016 2:09 pm

As you probably know, these fuses are incredibly hard to find, and cutting down a larger diameter fuse is difficult. Recently I found these on Ebay. The seller's ID is huskerfan42011, and I bought a package of 20 for $10. This is Littlefuse part # 0275.125M. Get 'em while you can.

Mike Peterson
New User
Posts: 6
Joined: Wed Jul 31, 2013 4:28 am

Re: .125a fuses for RF in R2200, etc.

Postby Mike Peterson » Sun Nov 20, 2016 7:10 pm

I have used the PICO II 251 series of fuses in the fused BNC jack on my R-2600 series monitors. Littelfuse number is 0251.062MXL, and Digi-Key always seems to have lots in stock. Their number is F2307-ND. The R-2600 uses a 62mA fuse on the fused jacks. If you need the 1/8 amp quick blow, then use the Digi-Key part number F2308-ND. The fuses are very close to the same sized diameter as the 0275.125M (that fuse is 0.093" diameter and the one I mention is at 0.110" diameter... 0.017 inches larger). Might be worth looking at for the R2200?


Return to “Test Equipment & RF Equipment Alignment”

Who is online

Users browsing this forum: No registered users and 1 guest