COM-120 aux amp failure

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
syopas
New User
Posts: 5
Joined: Sun Jan 20, 2013 4:26 am

COM-120 aux amp failure

Post by syopas »

If generator output is set above -13dBm(aux amp switched on) signal level drops below -30dBm.
At +13dBm level - output signal near -13dBm. Total generator amplifier gain is 1.

Aux amp based on uPC1677C medium power amplifier MMIC, which is probably died.
Somebody successfully replaced it with another type?
Or maybe possible to buy this IC?
Post Reply

Return to “Test Equipment & RF Equipment Alignment”