Motorola R2670A

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
wcu02mpa
Posts: 57
Joined: Mon May 12, 2003 5:08 pm

Motorola R2670A

Post by wcu02mpa »

I have a recently acquired R2670A with the following trunking options.

Astro analog trunking
Astro VSELP trunking
Asro IMBE trunking

Version: V6.03.T00

My question is will this do astro trunking only? Or is the astro conventional a seperate module?

Thanks
I may not fire the first shot, but I will fire the last one.
User avatar
d119
Posts: 3532
Joined: Tue Mar 19, 2002 4:00 pm

Re: Motorola R2670A

Post by d119 »

Can you select "PROJECT 25" in it? Or Just "P25 TRUNKING"?
jry
Posts: 481
Joined: Fri Feb 06, 2004 3:14 pm

Re: Motorola R2670A

Post by jry »

Chances are it's just the older trunking only slice installed. Just does the SmartNer trunking ...type I and Type II. ( 3600 baud )
It will do the analog ,VSLEP and IMBE based Smartnet radios but only does the control channel protocol testing and no voice demodulation unless its the pure analog setup.

There would be no P25 Trunking ( 9600 baud ) since that required the additional slice as well.
Post Reply

Return to “Test Equipment & RF Equipment Alignment”