R2100 Service monitor BFO pot/sw

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
xxx2fan
Posts: 84
Joined: Mon Oct 31, 2005 4:42 pm
What radios do you own?: HT750 Ht1250 CDM1250 CDM1550

R2100 Service monitor BFO pot/sw

Post by xxx2fan »

Hi I got a R2100 off of the bay and the BFO Potentiometor/Switch is bent and seems flakey, I turned it off and the monitor seems to be working in all other aspects. I have almost gone blind trying to identify the Pot for the BFO and figure out a replacement looking at the service manual PDF on the computer. Could someone help me out to identify the BFO potentiometer/switch and possibly a part number from Mouser or someone to replace it.
Thanks in advance for any help.
DJP126
Posts: 873
Joined: Wed Jun 18, 2003 6:41 am
What radios do you own?: What's a radio?

Re: R2100 Service monitor BFO pot/sw

Post by DJP126 »

IIRC the BFO control is a simple 5K pot, no switch to it. Motorola P/N 18-80346A14. Probably NLA.
Dave
xxx2fan
Posts: 84
Joined: Mon Oct 31, 2005 4:42 pm
What radios do you own?: HT750 Ht1250 CDM1250 CDM1550

Re: R2100 Service monitor BFO pot/sw

Post by xxx2fan »

Ok thanks I will be looking at in a few days as I'm on duty at my plant now.
Thanks again for the help.
Post Reply

Return to “Test Equipment & RF Equipment Alignment”