Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Motorola R2001D DTMF

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Adrianham
New User
Posts: 1
Joined: Thu May 25, 2017 5:26 pm

Motorola R2001D DTMF

Postby Adrianham » Thu May 25, 2017 5:55 pm

HI all

Im new to this forum, but saying that I have been reading lot of the post.

Very useful information guys!

I have purchased a early R2001D and it has had a new tube put in at some stage so its nice and bright.

Im lucky to have access other R2001D's to card jockey.

The later versions have the DTMF function, mine didn't. So I swapped the A14 Processor board to see what happens.

I gain all the new function with DTMF appearing too.

But When performing DTMF function there is no DTMF modulation or sound. Is there some hardware bit missing for this to work? (a link etc) May not be that simple.

My service manual is for the older R2001D and the new A14 PCB looks quite different.

Any help would be appreciated.

Regards Adrian.

Return to “Test Equipment & RF Equipment Alignment”

Who is online

Users browsing this forum: No registered users and 1 guest