Motorola R2001D DTMF

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
Adrianham
New User
Posts: 1
Joined: Thu May 25, 2017 5:26 pm

Motorola R2001D DTMF

Post by Adrianham »

HI all

Im new to this forum, but saying that I have been reading lot of the post.

Very useful information guys!

I have purchased a early R2001D and it has had a new tube put in at some stage so its nice and bright.

Im lucky to have access other R2001D's to card jockey.

The later versions have the DTMF function, mine didn't. So I swapped the A14 Processor board to see what happens.

I gain all the new function with DTMF appearing too.

But When performing DTMF function there is no DTMF modulation or sound. Is there some hardware bit missing for this to work? (a link etc) May not be that simple.

My service manual is for the older R2001D and the new A14 PCB looks quite different.

Any help would be appreciated.

Regards Adrian.
Post Reply

Return to “Test Equipment & RF Equipment Alignment”