ifr 1600s

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
joelhall
New User
Posts: 4
Joined: Tue Jul 04, 2017 4:44 am

ifr 1600s

Post by joelhall »

Hello ... my ifr 1600s has been loosing the set memory if i set up it and use it then after i turn the power off then come back turn it on all goes to default settings is there a memory battery?
jry
Posts: 481
Joined: Fri Feb 06, 2004 3:14 pm

Re: ifr 1600s

Post by jry »

yes ...not sure what version you have but there is one on the Memory card ...next to the processor.

There are a number of versions of processor and memory cards but if your battery is dead it's probably one of the older versions.

It's probably the Smart Battery module which is held in by a screw and has a 14 pin DIP socket underneath.
jry
Posts: 481
Joined: Fri Feb 06, 2004 3:14 pm

Re: ifr 1600s

Post by jry »

should be a Dallas DS1260-100 Smart Battery and a 16 pin DIP connector
joelhall
New User
Posts: 4
Joined: Tue Jul 04, 2017 4:44 am

Re: ifr 1600s

Post by joelhall »

Is this chip in a dip socket anf how hard is it to change?
joelhall
New User
Posts: 4
Joined: Tue Jul 04, 2017 4:44 am

Re: ifr 1600s

Post by joelhall »

if i order this Dallas DS1260-100 Smart Battery can i just replace it

joel
joelhall
New User
Posts: 4
Joined: Tue Jul 04, 2017 4:44 am

Re: ifr 1600s

Post by joelhall »

I can not find the DS1260-100 Manufacturer:DALLAS Encapsulation:DIP-16,Smart Battery in my 1600s can someone point me to it

joel
Post Reply

Return to “Test Equipment & RF Equipment Alignment”