Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Wowbagger,ifr1900 calibration need disassembly?

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

New User
Posts: 7
Joined: Fri Nov 04, 2011 3:12 am

Wowbagger,ifr1900 calibration need disassembly?

Postby lau190 » Sat Nov 19, 2011 9:46 am

Dear Wowbagger,
ifr1900 calibration need disassembly ? or just input the password then do it auto?
Can you brief tell me IFR 1900 calibrtion procedure?

User avatar
Posts: 1287
Joined: Tue Dec 10, 2002 10:46 am

Re: Wowbagger,ifr1900 calibration need disassembly?

Postby Wowbagger » Sat Nov 19, 2011 12:02 pm

*Most* of the calibration can be done covers-on, but you need proper equipment to do it. I would strongly suggest you get it done professionally.
This is my opinion, not Aeroflex's.

I WILL NOT give you proprietary information. I make too much money to jeopardize my job.

I AM NOT the Service department: You want official info, manuals, service info, parts, calibration, etc., contact Aeroflex directly, please.

Posts: 477
Joined: Tue Jun 15, 2004 8:00 am

Re: Wowbagger,ifr1900 calibration need disassembly?

Postby GlennD » Sat Nov 19, 2011 5:45 pm

Wowbagger is constrained by being an IFR employee. He is very helpful within those constraints. He can not give out info that would get him in trouble.

He was very helpful with help on the IFR1600 I owned but If you want calibration info then you need to purchase a service manual.

I purchased one on Ebay that was module level but it contained alignment instructions.

Before you ask, I included the manual with the 1600 when I sold it.

I now have a HP8920B in its place and I am much happier. The Interface is like night and day.

Return to “Test Equipment & RF Equipment Alignment”

Who is online

Users browsing this forum: No registered users and 1 guest