How to change frequency restriction in pgm software

Release notes for new versions of programming software and firmware, for any product, should be posted here, as well as topics discussing issues and bugs with and FSB's/SRN's for particular releases.

Moderator: Queue Moderator

Post Reply
w2drz
New User
Posts: 1
Joined: Wed Jul 13, 2011 8:37 am

How to change frequency restriction in pgm software

Post by w2drz »

Hi,

Been a MSS for over 40 years so have all programming software but need info:

Am new here and need info on how to modify pgm software to program radios to ham frequency.

Have R100 repeater need to move to 444 MHz otherwise to the crusher it goes.
With comming Narrow Banding in near future have many good radios being JUNKED that could be put on ham freq's.

Thank You
Tom W2DRZ
User avatar
escomm
Queue Moderator
Posts: 5170
Joined: Fri Mar 24, 2006 8:24 pm

Re: How to change frequency restriction in pgm software

Post by escomm »

Easy guide posted on batlabs main site: http://www.batlabs.com/r100.html
Post Reply

Return to “Software & Firmware Releases & Issues”