I have programmed multiple zones in both models of radio and assigned a few channels to each zone, and assigned buttons for zone selection but the radios see the channels as one long list not separate zones, even though CPS shows them in multiple zones.
What am I doing wrong?
Creating Conventional Zones for XPR 7550 and 5550
Moderator: Queue Moderator
Creating Conventional Zones for XPR 7550 and 5550
Semper Fidelis
Some Cops are Perfect, the rest ride in patrol cars!
Some Cops are Perfect, the rest ride in patrol cars!
Re: Creating Conventional Zones for XPR 7550 and 5550
Trbo cps logic is a bit weird. We have a whole Trbo group that lives, eats, and breathes Trbo. I don't get to touch them very often at all. But, I've had to muddle through them for a couple customers. You have to define zones, and then put channels in the zones. And you may have to define a zone button too.
Re: Creating Conventional Zones for XPR 7550 and 5550
Did you change FPP from user to disabled?
Re: Creating Conventional Zones for XPR 7550 and 5550
Ill try disabling the FPP. I did not think those two things would be connected, thank you.
Semper Fidelis
Some Cops are Perfect, the rest ride in patrol cars!
Some Cops are Perfect, the rest ride in patrol cars!
Re: Creating Conventional Zones for XPR 7550 and 5550
No I think it's the other way around
FPP disabled puts everything in 1 zone
FPP as user makes it work like you'd expect
I think
Please don't quote me on it
FPP disabled puts everything in 1 zone
FPP as user makes it work like you'd expect
I think
Please don't quote me on it
Re: Creating Conventional Zones for XPR 7550 and 5550
No luck, I changed the FPP from Dealer to User, made sure there is a password in the box, and made sure I have a Zone button.
Semper Fidelis
Some Cops are Perfect, the rest ride in patrol cars!
Some Cops are Perfect, the rest ride in patrol cars!
Re: Creating Conventional Zones for XPR 7550 and 5550
This fixed it.
"On the buttons tab, try changing the Numeric Keypad selection from channels in all zones to channel in home zone"
Thank you Jeff!
"On the buttons tab, try changing the Numeric Keypad selection from channels in all zones to channel in home zone"
Thank you Jeff!
Semper Fidelis
Some Cops are Perfect, the rest ride in patrol cars!
Some Cops are Perfect, the rest ride in patrol cars!
Re: Creating Conventional Zones for XPR 7550 and 5550
Like I said, you have to muddle.