Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Sel Call on an XPR7550e

Moderator: Queue Moderator

User avatar
n4ogl
Posts: 5
Joined: Mon Aug 14, 2006 11:35 am
What radios do you own?: APX7K, XPR7550e

Sel Call on an XPR7550e

Postby n4ogl » Tue Jun 21, 2016 9:10 am

Greetings - I need some help from the 'wizened professionals' here.

We've got fire season out here in California, and I wanted to monitor the L.A. County Fire Dispatch Channel (Blue-8, if anyone cares) to hear any potential tone-outs for the Battalion nearest my home (and therefore early warning of any fires in the area). I see that the XPR will accept Sel Call (or QCII) programming.

After entering all the obvious things, I can get the radio to issue a short tone once it receives the tones for the nearby Battalion, but I can seem to get it to unmute to pass the voice audio that usually follows the tone-out (like a Minitor used to do).

So - my question is (for those wizened professionals that have gotten it to work): what settings do I need to get the radio to unmute and pass audio, and then how do I set up the reset (Manual, or something else)? I don't fully understand what all the various options are in the signalling programming, hence my question.

Thanks.
Mark
Back home, again, in California.

n1gtl
Posts: 91
Joined: Tue Mar 25, 2008 12:43 pm
What radios do you own?: XPR5550, XPR7550e

Re: Sel Call on an XPR7550e

Postby n1gtl » Tue Jun 21, 2016 9:25 am

Look at your channel profile. Below the signaling system box on the RX side you will see another drop-down box that says SIGNALING SQUELCH and another box with "UNMUTE RULE.

That is where you need to set it up. How it goes depends on if the PL is stripped when the page is sent. Toy with those settings.

To reset, you just need to hit the PTT button.


Return to “MotoTRBO Portables and Mobiles (3xxx/5xxx/7xxx/SL) 2.0 Series Subscribers”

Who is online

Users browsing this forum: No registered users and 1 guest