- Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
Service Software (RSS) or Customer Programming Software (CPS)
- Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
- Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
- Any other items which may be deemed as offensive
If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.
Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.
Moderator: Queue Moderator
2 posts • Page 1 of 1
I have set up 6 XPR5350 mobile radios for a recording system at one of our local airports. Basically i have 1 mobile for every channel that will be recorded. I have used pin 9 and 10 which is the spker+ and spker- to be hooked to the recording system. My question is the system works but the volume has to be up about half way for it to record. Is there anyway i can mute the front speaker so the audio does not come blasting out of the mobile? Or should i be using pin 14 which is rx audio and ground would hat make a difference? I am just trying to mute the audio coming from the front of the mobile with the audio only going through the back to the recording equipment......
Pin 14 is the only answer for this. Volume can be turned off on the radio and you'll have nice, clear, crisp filtered audio.
Schrodinger's Radio: It is simultaneously too loud and too quiet, but you will never know which until someone transmits.
Who is online
Users browsing this forum: No registered users and 1 guest