XTS2500 900mhz ham band
Moderator: Queue Moderator
-
- Posts: 1890
- Joined: Wed Jan 16, 2002 4:00 pm
- What radios do you own?: ht1550 XLS,6 MT-1000,
XTS2500 900mhz ham band
I am trying to find full info on how to hex edit the CPS for 900.mhz but seem to find only bits and pieces. i have hex edited xpr but never the XPS and not sure were to start
Re: XTS2500 900mhz ham band
It's pretty straight forward, if you follow the directions here on the site for modifying it for the UHF radios, just change the values for the 900 stuff.
Re: XTS2500 900mhz ham band
What version of CPS are you using?
-
- Posts: 1890
- Joined: Wed Jan 16, 2002 4:00 pm
- What radios do you own?: ht1550 XLS,6 MT-1000,
Re: XTS2500 900mhz ham band
r15.00.00
Re: XTS2500 900mhz ham band
Use the replace command to look for the following hex strings, and then replace them with the provided strings. Make sure you are searching for hex values.
RX Lower Limit / TX TA Lower Limit
Factory: 935.0125 = 9428BB37
Change to
Ham: 926.0000 = 80A33137
Replace command should report changes in twelve places
TX RPT Upper Limit
Factory: 901.9875 = AC3CC335
Change to
Ham: 903.0000 = C0AFD235
Replace command should report changes in one place
RX Lower Limit / TX TA Lower Limit
Factory: 935.0125 = 9428BB37
Change to
Ham: 926.0000 = 80A33137
Replace command should report changes in twelve places
TX RPT Upper Limit
Factory: 901.9875 = AC3CC335
Change to
Ham: 903.0000 = C0AFD235
Replace command should report changes in one place
-
- Posts: 1890
- Joined: Wed Jan 16, 2002 4:00 pm
- What radios do you own?: ht1550 XLS,6 MT-1000,
Re: XTS2500 900mhz ham band
i figured it all out got it working