Consolette Replace Astro Spectra + With XTL
Moderator: Queue Moderator
Consolette Replace Astro Spectra + With XTL
I was wondering if i could use a XTL in a astro spectra + consolette with the ACIM/TRC
-
- Posts: 1854
- Joined: Tue Jan 13, 2004 7:03 am
Re: Consolette Replace Astro Spectra + With XTL
The XTL brick needs to have the W-series TIB (NOT W3) and needs to be configured for a W7 head in CPS. "Consolette Enable" needs to be checked in CPS as well. Moto never made an O-series XTL consolette so you're stuck with the W7 head.
Re: Consolette Replace Astro Spectra + With XTL
Yeah, I figured that the XTL brick would have to have the correct tib for w series. I was just checking to make sure it is possible to replace the astro spectra + drawer with a proper configured xtl drawer and everything work correctly/
-
- Posts: 57
- Joined: Wed Jul 18, 2007 12:42 pm
Re: Consolette Replace Astro Spectra + With XTL
I suspect so, I have gone the other way and used an sb9600 board from an xtl with an astro Spectra. My only issue was I could not line up button commands with the Spectra, channel up and down worked though.
Re: Consolette Replace Astro Spectra + With XTL
Awesome, only need one channel anyways. So as long as it passes the correct data over the ACIM ill be happy.
Re: Consolette Replace Astro Spectra + With XTL
PM me if you cannot locate the Consolette interconnect board and ribbon cable.
Re: Consolette Replace Astro Spectra + With XTL
Well got everthing swapped out and everything works as it should. Reminded me how much I hate the consolette case.