Questions and a Flashcode discrepancy...
Moderator: Queue Moderator
-
- Posts: 347
- Joined: Sun May 24, 2009 12:23 am
- What radios do you own?: Desktrac, XTL/XTS's & XPR's
Questions and a Flashcode discrepancy...
Guys,
I'm looking at a XTL5000 on eBay, but first I have a few questions...
1) Can I take an A7/A9 head from a Spectra and program it up instead of an O5? I am in need of the DTMF pad on the radio and I've found mixed reports about taking an A7/A9 head and doing this.
2) This is a dual head setup, so can I have the above listed A7/A9 head and an O5 head on the same radio?
3) A friend of mine who has access to the depot tool put in the flashcode in a new codeplug to test it out and the CPS kicked the codeplug back. The flashcode is 500008-000480-5* and the last digit -5 isn't taking, wants to convert it to -0. Does anyone have the depot tool who can verify that this is indeed a valid codeplug? Using akardam's flashcode decoder both -0 and -5 show the same decode as shown below.
*Q806/G806 IMBE / APCO-25 Digital Operation
H14/G114 Digital ID Display
H38/G51 Smartzone Operation
Q173/G173 Smartzone OmniLink Operation
Q361/G361 Digital APCO-25 IMBE Trunking (9600kb Control)
Regards,
-Frank C.
I'm looking at a XTL5000 on eBay, but first I have a few questions...
1) Can I take an A7/A9 head from a Spectra and program it up instead of an O5? I am in need of the DTMF pad on the radio and I've found mixed reports about taking an A7/A9 head and doing this.
2) This is a dual head setup, so can I have the above listed A7/A9 head and an O5 head on the same radio?
3) A friend of mine who has access to the depot tool put in the flashcode in a new codeplug to test it out and the CPS kicked the codeplug back. The flashcode is 500008-000480-5* and the last digit -5 isn't taking, wants to convert it to -0. Does anyone have the depot tool who can verify that this is indeed a valid codeplug? Using akardam's flashcode decoder both -0 and -5 show the same decode as shown below.
*Q806/G806 IMBE / APCO-25 Digital Operation
H14/G114 Digital ID Display
H38/G51 Smartzone Operation
Q173/G173 Smartzone OmniLink Operation
Q361/G361 Digital APCO-25 IMBE Trunking (9600kb Control)
Regards,
-Frank C.
-
- Posts: 152
- Joined: Wed May 02, 2012 11:30 am
Re: Questions and a Flashcode discrepancy...
That's probably because the checksum digit is zerofchrist16 wrote: ~ wants to convert it to -0 ~
Try akardam's checksum calculator: http://www.akardam.net/moto/tools/flash ... o=checksum
-
- Posts: 347
- Joined: Sun May 24, 2009 12:23 am
- What radios do you own?: Desktrac, XTL/XTS's & XPR's
Re: Questions and a Flashcode discrepancy...
That's what I used to figure out that -5 and -0 is the same.
Regards,
-Frank C.
Regards,
-Frank C.
Re: Questions and a Flashcode discrepancy...
You said you used the "flashcode decoder"....not the checksum calculator. Different tool.fchrist16 wrote:That's what I used to figure out that -5 and -0 is the same.
Regards,
-Frank C.
-
- Posts: 347
- Joined: Sun May 24, 2009 12:23 am
- What radios do you own?: Desktrac, XTL/XTS's & XPR's
Re: Questions and a Flashcode discrepancy...
Hmm, makes me wonder if the poster didn't type it in right or something...
Regards,
-Frank C.
Regards,
-Frank C.
-
- Posts: 152
- Joined: Wed May 02, 2012 11:30 am
Re: Questions and a Flashcode discrepancy...
Which "poster" didn't type what in right?
The flashcode DECODER does just that, it doesn't care what checksum digit you enter.
Whereas as the checksum CALCULATOR... well, it's pretty self-explanatory really, and actually unnecessary because as you've discovered, that other program (which shall remain unnamed) calculates it for you.
The flashcode DECODER does just that, it doesn't care what checksum digit you enter.
Whereas as the checksum CALCULATOR... well, it's pretty self-explanatory really, and actually unnecessary because as you've discovered, that other program (which shall remain unnamed) calculates it for you.
-
- Posts: 347
- Joined: Sun May 24, 2009 12:23 am
- What radios do you own?: Desktrac, XTL/XTS's & XPR's
Re: Questions and a Flashcode discrepancy...
The poster of the listing I'm looking at. Thanks for the help on the flashcode issue...Now the A7/A9 heads...
Regards,
-Frank C.
Regards,
-Frank C.
- spectragod
- Posts: 2029
- Joined: Sun Dec 30, 2001 4:00 pm
- What radios do you own?: FPP 6 meter XTL 5K's
Re: Questions and a Flashcode discrepancy...
Astro Spectra heads will work, not regular Spectra heads, you will also need a TIB with dual DB25's on it.fchrist16 wrote:The poster of the listing I'm looking at. Thanks for the help on the flashcode issue...Now the A7/A9 heads...
Regards,
-Frank C.
Kilgore: Smell that? You smell that?
Lance: What?
Kilgore: Napalm, son. Nothing in the world smells like that.
Kilgore: I love the smell of napalm in the morning. You know, one time we had a hill bombed, for 12 hours. When it was all over, I walked up. We didn't find one of 'em, not one stinkin' dink body. The smell, you know that gasoline smell, the whole hill. Smelled like... victory. Someday this war's gonna end...
____________
Revelation 6:8
Lance: What?
Kilgore: Napalm, son. Nothing in the world smells like that.
Kilgore: I love the smell of napalm in the morning. You know, one time we had a hill bombed, for 12 hours. When it was all over, I walked up. We didn't find one of 'em, not one stinkin' dink body. The smell, you know that gasoline smell, the whole hill. Smelled like... victory. Someday this war's gonna end...
____________
Revelation 6:8
-
- Posts: 347
- Joined: Sun May 24, 2009 12:23 am
- What radios do you own?: Desktrac, XTL/XTS's & XPR's
Re: Questions and a Flashcode discrepancy...
Thank you spectra god!
Regards,
-Frank C.
Regards,
-Frank C.