XTS2500 900mhz ham band

Moderator: Queue Moderator

Post Reply
KitN1MCC
Posts: 1890
Joined: Wed Jan 16, 2002 4:00 pm
What radios do you own?: ht1550 XLS,6 MT-1000,

XTS2500 900mhz ham band

Post by KitN1MCC »

I am trying to find full info on how to hex edit the CPS for 900.mhz but seem to find only bits and pieces. i have hex edited xpr but never the XPS and not sure were to start
User avatar
d119
Posts: 3532
Joined: Tue Mar 19, 2002 4:00 pm

Re: XTS2500 900mhz ham band

Post by d119 »

It's pretty straight forward, if you follow the directions here on the site for modifying it for the UHF radios, just change the values for the 900 stuff.
Number 6
Posts: 20
Joined: Fri Dec 30, 2016 10:55 am

Re: XTS2500 900mhz ham band

Post by Number 6 »

What version of CPS are you using?
KitN1MCC
Posts: 1890
Joined: Wed Jan 16, 2002 4:00 pm
What radios do you own?: ht1550 XLS,6 MT-1000,

Re: XTS2500 900mhz ham band

Post by KitN1MCC »

r15.00.00
Number 6
Posts: 20
Joined: Fri Dec 30, 2016 10:55 am

Re: XTS2500 900mhz ham band

Post by Number 6 »

Use the replace command to look for the following hex strings, and then replace them with the provided strings. Make sure you are searching for hex values.

RX Lower Limit / TX TA Lower Limit
Factory: 935.0125 = 9428BB37
Change to
Ham: 926.0000 = 80A33137
Replace command should report changes in twelve places

TX RPT Upper Limit
Factory: 901.9875 = AC3CC335
Change to
Ham: 903.0000 = C0AFD235
Replace command should report changes in one place
KitN1MCC
Posts: 1890
Joined: Wed Jan 16, 2002 4:00 pm
What radios do you own?: ht1550 XLS,6 MT-1000,

Re: XTS2500 900mhz ham band

Post by KitN1MCC »

i figured it all out got it working
Post Reply

Return to “ASTRO25 Series (XTS/XTL 1500/2500/5000) Subscribers”