Looking for guidance. I received a pre-programmed APX 7000 which had three separate P25 trunking systems in it. All was tested and working fine. I copied the codeplug and saved it, then added one talkgroup to one of the profiles. After I sent the modified codeplug back to the radio and turned to that talkgroup I got a Sys Reg Refused message on that talk group and every other TG on that same system. I then opened the original codeplug and sent it back to the radio, still shows reg refused on all TG's on that particular system.
Any help would be appreciated.
APX 7000 on P25 SYS REG REFUSED
Moderator: Queue Moderator
Re: APX 7000 on P25 SYS REG REFUSED
So I believe this was simply a glitch in the system with the radio ID. Over night, the radio was accepted back onto the system and all groups are functioning again.
-
MSS-Dave
- Posts: 770
- Joined: Mon Jun 30, 2003 6:02 pm
- What radios do you own?: XTL5K, NX300, PD782, Spark Gap
Re: APX 7000 on P25 SYS REG REFUSED
Do you have a system key for the trunked system or systems in the radio? If not, you can't modify T/G or any other info pertaining to the system.
-
MSS-Dave
- Posts: 770
- Joined: Mon Jun 30, 2003 6:02 pm
- What radios do you own?: XTL5K, NX300, PD782, Spark Gap
Re: APX 7000 on P25 SYS REG REFUSED
Or that... LOL.So I believe this was simply a glitch in the system with the radio ID. Over night, the radio was accepted back onto the system and all groups are functioning again.