Top Display Question

Covering the following Subscriber devices: APX1000/1500, APX3000, APX4000/4500, APX6000, APX6000XE, APX6500, APX7000, APX7000XE, APX7000L, APX7500, and APX8000.

Moderator: Queue Moderator

Post Reply
User avatar
motoapco25
Posts: 1147
Joined: Wed Jan 15, 2003 2:58 pm

Top Display Question

Post by motoapco25 »

How do you stop it from showing zone on the top display? how about ID`s just channel ?
sjxts3000
No Longer Registered
Posts: 958
Joined: Sat Jul 09, 2011 8:14 pm

Re: Top Display Question

Post by sjxts3000 »

That's a multi part question.

To stop it from showing a zone on the top display, don't set a top display zone name (which is limited to 8 characters anyway). This is in the Zone Channel Assignment screen for each zone (called "Top Display Zone")

To show channel names, configure a top display channel name (8 chars max). This is in the Zone Channel Assignment screen for each zone channel assignment section (called "Top Display Channel")

To show talkgroup ID's, you have to set the Talkgroup ID to show on Rx. This is under "Radio Ergonomics Wide" --> "Display" --> "ID Display" --> Talkgroup --> "Display on Receive"
Post Reply

Return to “APX Series Subscribers”