APX7500 MP TIB Microphone

Covering the following Subscriber devices: APX1000/1500, APX3000, APX4000/4500, APX6000, APX6000XE, APX6500, APX7000, APX7000XE, APX7000L, APX7500, and APX8000.

Moderator: Queue Moderator

Post Reply
User avatar
wnyevs
Posts: 29
Joined: Fri Feb 18, 2011 6:09 pm
What radios do you own?: CDM1250 VHF, XTS3000 M1 UHF

APX7500 MP TIB Microphone

Post by wnyevs »

I have a APX7500 Dual Band, Mid-Power Remote Mount with two O2 Control Heads installed in a Fire Engine. One head is at the pump panel, the other head is in the cab mounted high on the upper brow for the driver and officer to use.

I wanted to eliminate the inside microphone cable from hanging down so I had the concept of remotely locating the microphone connector using the PMKN4034 20' extension cable and routing that to the J700 connector on the TIB.

I cannot get the microphone to work using this concept. I tried plugging the microphone directly into the TIB with no luck. I feel like I am missing a CPS setting.

Any suggestions on if this is even possible?
Carl Bourke - Owner
WNY Emergency Vehicle Solutions
www.wnyevs.com
owner@wnyevs.com
Post Reply

Return to “APX Series Subscribers”